Launch a web browser from a computer or mobile device that is connected to your router’s network.
A login window opens.
Enter the router user name and password.
The user name is admin and the default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
Select ADVANCED > Security > Access Control.
Select the Turn on Access Control check box.
You must select this check box before you can specify an access rule and use the Allow and Block buttons. When this check box is cleared, all devices are allowed to connect, even if a device is in the blocked list.
To specify an access rule, select one of the following radio buttons:
Allow all new devices to connect. With this setting, a new device can access your network. You don't need to enter its MAC address in this screen.
Block all new devices from connecting. With this setting, a new device cannot access your router’s Internet connection, but can still access your router’s local network. Before a device accesses your router’s Internet connection, you must enter its MAC address for an Ethernet connection and its MAC address for a WiFi connection in the allowed list.
The access rule does not affect previously blocked or allowed devices. It applies only to devices joining your network in the future after you apply these settings.
To view allowed or blocked devices that are not connected, click one of the following links:
To allow the computer or device you’re currently using to continue to access your network, select the check box next to your computer or device.
