Вопрос по CLI TE кодека.

Привет! 

К сожалению нет. 

Для сетевой диагностики есть только такое:

ccm Net 

Формат ввода:

ccm Net ping <ip>[times]  

ccm Net traceroute <ip>[maxhopnum] [routetimeout]

Parameters

·       ip: specifies the IP address.

·       times: specifies the number of times that the IP address is pinged.If this parameter is not set, the default value 4 is used.

·       maxhopnum: specifies the maximum number of hops inroute detection. If this parameter is not set, the default value 10 is used.

routetimeout:specifies the timeout duration for each route detection, in seconds. If thisparameter is not set, the default value 5 is used.