De acuerdo
Empresa
Comunidad Foro Router
WLAN HG824H by telnet

WLAN HG824H by telnet

Publicado 2020-4-29 19:01:51Última respuesta Sep 10, 2020 12:40:30 406 9 0 0 0
  Recompensa Goldies ： 0 (solución de problemas)
Mostrar todos los comentarios 1#

Hello,

I'm having trouble setting up the WLAN HG8245H by telnet


I need to set WPA / WPA2 password


set wlan basic laninst 1 wlaninst 1 enable 1 ssid TEST regdomain BR wmmenable 1 wpaandieee11iauthenticationmode PreSharedKey wpaandieee11iencryptionmodes TKIP & AES


Can someone help me?


ONT 8245Hwlanontadd ONT to OLTONT Series
  • x
  • convención：

Me gusta (0) No me gusta (0) Favorito(0) Compartir Reporte
Previo: GANA CON LA PREGUNTA DEL DÍA ¿Cómo realiza el Ruteador las Decisiones de Ruteo?
Próximo: Familia de routers de Huawei
Respuestas destacadas

Mejor respuesta

(0) (0)
wissal
VIP Publicado 2020-4-30 00:48:35

Hello,

Please, refer to below guide


set wlan basic


Function

This command is used to set the basic parameters of WLAN, the commonly used include the interface energy, interface name, interface authentication type, the interface is empty hide, etc...

Format

set wlan basic laninst laninstid wlaninst wlaninstid [ enable enable | regdomain regdomain | power power | channel channel | autochannel autochannel | ht20 ht20 | ssid ssid | ssidhide ssidhide | rate rate | wmmenable wmmenable | beaconType beaconType | basicencryptionmodes basicencryptionmodes | basicauthenticationmode basicauthenticationmode | wpaencryptionmodes wpaencryptionmodes | wpaauthenticationmode wpaauthenticationmode | ieee11iencryptionmodes ieee11iencryptionmodes | ieee11iauthenticationmode ieee11iauthenticationmode | wepkeyindex wepkeyindex | wepencryptionlevel wepencryptionlevel | radiuserver radiuserver | radiusport radiusport | radiuskey radiuskey  | grouprekey grouprekey  | associatenum associatenum  | powerlevel powerlevel  | wpskeyword wpskeyword  | serviceenable serviceenable  | retrytimeout retrytimeout  | wpaandieee11iencryptionmodes wpaandieee11iencryptionmodes | wpaandieee11iauthenticationmode wpaandieee11iauthenticationmode | hwstandard hwstandard | bindingmode bindingmode | bindingvlan bindingvlan | lowerlayers lowerlayers ]*

Parameters

[tr]Parameter
Description
Value
[/tr]

laninstid
Indicates the instance ID of the LAN device node.
Numeral type. Value: 1.
wlaninstid
Indicates the instance ID of the WLAN configuration node, mapping the SSID.
Integer type. Range: 1-4.
enable
Enables or disables the SSID.
Integer type. Value: 0–1.
regdomain
Indicates the region code.
Character string type, a string of 1–3 characters.
power
Indicates the level of the current transmit power.
Numeral type. Range: 20, 40, 60, 80, 100.
channel
Indicates the channel to which the WLAN module belongs.
Integer type. Value: 0–255.
autochannel
Enables or disables automatic channel selection.
Integer type. Value: 0–1.
ht20
Indicates the channel bandwidth.
Integer type. Value: 0–3.
ssid
Indicates the service set identifier (SSID).
Character string type, a string of 1–32 characters.
ssidhide
Hides or unhides the SSID.
Integer type. Value: 0–1.
rate
Indicates the maximum bandwidth (unit: Mbit/s).
Character string type, a string of 1–4 characters.
wmmenable
Enables or disables Wi-Fi multimedia (WMM).
Integer type. Value: 0–1.
beaconType
Indicates the encryption mode.
Character string type, a string of 1–32 characters.
basicencryptionmodes
Indicates the basic encryption mode.
Character string type, a string of 1–32 characters.
basicauthenticationmode
Indicates the basic authentication mode.
Character string type, a string of 1–32 characters.
wpaencryptionmodes
Indicates the WPA encryption mode.
Character string type, a string of 1–32 characters.
wpaauthenticationmode
Indicates the WPA authentication mode.
Character string type, a string of 1–32 characters.
ieee11iencryptionmodes
Indicates the IEEE11i encryption mode.
Character string type, a string of 1–32 characters.
ieee11iauthenticationmode
Indicates the IEEE11i authentication mode.
Character string type, a string of 1–32 characters.
wepkeyindex
Indicates the default WEP key index.
Integer type. Value: 1–4.
wepencryptionlevel
Indicates the length of the WEP key.
Numeral type. Range: 40–bit, 104–bit.
radiuserver
Indicates the RADIUS server address.
Character string type, a string of 1–32 characters.
radiusport
Indicates the RADIUS server port.
Integer type. Value: 0–65535.
radiuskey
Indicates the RADIUS server key.
Character string type, a string of 0–64 characters.
grouprekey
Indicates the key renew period.
Integer type. Value: 600–86400.
associatenum
Indicates the number of access users.
Integer type. Value: 1–32.
powerlevel
Indicates the power level of the RF module.
Integer type. Value: 1–5.
wpskeyword
Indicates the key WPS word.
Integer type. Value: 0–128.
serviceenable
Enables the SSID service.
Integer type. Value: 0–1.
retrytimeout
Indicates the longest interval of timeout retransmission.
Integer type. Value: 0–32.
wpaandieee11iencryptionmodes
Indicates the encryption mode with hybrid authentication.
Character string type, a string of 1–32 characters.
wpaandieee11iauthenticationmode
Indicates the authentication mode.
Character string type, a string of 1–32 characters.
hwstandard
Indicates the IEEE 802.11 mode.
Character string type, a string of 1–16 characters.
bindingmode
Indicates thee bind mode of service.
Integer type. Value: 0–1.
bindingvlan
Indicates the bind VLAN of service.
Character string type, a string of 0–128 characters.
lowerlayers
Indicates the LowerLayers.
Character string type, a string of 0–1024 characters.


Modes

SU mode

Level

Administrator level

Usage Guidelines

None

Example

To set the SSID1 enable switch to 1, do as follows:
SU_WAP>set wlan basic laninst 1 wlaninst 1 enable 1success!
SU_WAP>
System Response

  • The system displays "success!" when the command is executed successfully.

  • For more information about the error message that the system displays against a command entered with incorrect syntax, refer to Error Command.


Thanks

Ver más
  • x
  • convención：
Todas las respuestas
wissal
wissal VIP Publicado 2020-4-30 00:48:35

Hello,

Please, refer to below guide


set wlan basic


Function

This command is used to set the basic parameters of WLAN, the commonly used include the interface energy, interface name, interface authentication type, the interface is empty hide, etc...

Format

set wlan basic laninst laninstid wlaninst wlaninstid [ enable enable | regdomain regdomain | power power | channel channel | autochannel autochannel | ht20 ht20 | ssid ssid | ssidhide ssidhide | rate rate | wmmenable wmmenable | beaconType beaconType | basicencryptionmodes basicencryptionmodes | basicauthenticationmode basicauthenticationmode | wpaencryptionmodes wpaencryptionmodes | wpaauthenticationmode wpaauthenticationmode | ieee11iencryptionmodes ieee11iencryptionmodes | ieee11iauthenticationmode ieee11iauthenticationmode | wepkeyindex wepkeyindex | wepencryptionlevel wepencryptionlevel | radiuserver radiuserver | radiusport radiusport | radiuskey radiuskey  | grouprekey grouprekey  | associatenum associatenum  | powerlevel powerlevel  | wpskeyword wpskeyword  | serviceenable serviceenable  | retrytimeout retrytimeout  | wpaandieee11iencryptionmodes wpaandieee11iencryptionmodes | wpaandieee11iauthenticationmode wpaandieee11iauthenticationmode | hwstandard hwstandard | bindingmode bindingmode | bindingvlan bindingvlan | lowerlayers lowerlayers ]*

Parameters

[tr]Parameter
Description
Value
[/tr]

laninstid
Indicates the instance ID of the LAN device node.
Numeral type. Value: 1.
wlaninstid
Indicates the instance ID of the WLAN configuration node, mapping the SSID.
Integer type. Range: 1-4.
enable
Enables or disables the SSID.
Integer type. Value: 0–1.
regdomain
Indicates the region code.
Character string type, a string of 1–3 characters.
power
Indicates the level of the current transmit power.
Numeral type. Range: 20, 40, 60, 80, 100.
channel
Indicates the channel to which the WLAN module belongs.
Integer type. Value: 0–255.
autochannel
Enables or disables automatic channel selection.
Integer type. Value: 0–1.
ht20
Indicates the channel bandwidth.
Integer type. Value: 0–3.
ssid
Indicates the service set identifier (SSID).
Character string type, a string of 1–32 characters.
ssidhide
Hides or unhides the SSID.
Integer type. Value: 0–1.
rate
Indicates the maximum bandwidth (unit: Mbit/s).
Character string type, a string of 1–4 characters.
wmmenable
Enables or disables Wi-Fi multimedia (WMM).
Integer type. Value: 0–1.
beaconType
Indicates the encryption mode.
Character string type, a string of 1–32 characters.
basicencryptionmodes
Indicates the basic encryption mode.
Character string type, a string of 1–32 characters.
basicauthenticationmode
Indicates the basic authentication mode.
Character string type, a string of 1–32 characters.
wpaencryptionmodes
Indicates the WPA encryption mode.
Character string type, a string of 1–32 characters.
wpaauthenticationmode
Indicates the WPA authentication mode.
Character string type, a string of 1–32 characters.
ieee11iencryptionmodes
Indicates the IEEE11i encryption mode.
Character string type, a string of 1–32 characters.
ieee11iauthenticationmode
Indicates the IEEE11i authentication mode.
Character string type, a string of 1–32 characters.
wepkeyindex
Indicates the default WEP key index.
Integer type. Value: 1–4.
wepencryptionlevel
Indicates the length of the WEP key.
Numeral type. Range: 40–bit, 104–bit.
radiuserver
Indicates the RADIUS server address.
Character string type, a string of 1–32 characters.
radiusport
Indicates the RADIUS server port.
Integer type. Value: 0–65535.
radiuskey
Indicates the RADIUS server key.
Character string type, a string of 0–64 characters.
grouprekey
Indicates the key renew period.
Integer type. Value: 600–86400.
associatenum
Indicates the number of access users.
Integer type. Value: 1–32.
powerlevel
Indicates the power level of the RF module.
Integer type. Value: 1–5.
wpskeyword
Indicates the key WPS word.
Integer type. Value: 0–128.
serviceenable
Enables the SSID service.
Integer type. Value: 0–1.
retrytimeout
Indicates the longest interval of timeout retransmission.
Integer type. Value: 0–32.
wpaandieee11iencryptionmodes
Indicates the encryption mode with hybrid authentication.
Character string type, a string of 1–32 characters.
wpaandieee11iauthenticationmode
Indicates the authentication mode.
Character string type, a string of 1–32 characters.
hwstandard
Indicates the IEEE 802.11 mode.
Character string type, a string of 1–16 characters.
bindingmode
Indicates thee bind mode of service.
Integer type. Value: 0–1.
bindingvlan
Indicates the bind VLAN of service.
Character string type, a string of 0–128 characters.
lowerlayers
Indicates the LowerLayers.
Character string type, a string of 0–1024 characters.


Modes

SU mode

Level

Administrator level

Usage Guidelines

None

Example

To set the SSID1 enable switch to 1, do as follows:
SU_WAP>set wlan basic laninst 1 wlaninst 1 enable 1success!
SU_WAP>
System Response

  • The system displays "success!" when the command is executed successfully.

  • For more information about the error message that the system displays against a command entered with incorrect syntax, refer to Error Command.


Thanks

Ver más
  • x
  • convención：
Eldelosass
Eldelosass Publicado 2020-4-30 05:14:07
Hello, what error do you get? Can you please put screenshot? Thank you
Ver más
  • x
  • convención：
Experto%20en%20m%C3%B3viles%20y%20emprendedor%20digital%20en%20Espa%C3%B1a%20desde%201994
jcaptiodv
jcaptiodv Publicado 2020-4-30 11:24:38

error

este es  mi error  la verdad no  se como  introducir la nueva contraseña

Ver más
  • x
  • convención：
jcaptiodv
jcaptiodv Publicado 2020-4-30 11:25:04
la idea es cambiar la clave del wifi por este medio
Ver más
  • x
  • convención：
jcaptiodv
jcaptiodv Publicado 2020-4-30 18:58:45
plz
Ver más
  • x
  • convención：
jcaptiodv
jcaptiodv Publicado 2020-5-16 08:54:46
Publicado por Eldelosass a las 2020-04-30 05:14 Hello, what error do you get? Can you please put screenshot? Thank you
disculpa me puedes ayudar??
Ver más
  • x
  • convención：

algonpo90
algonpo90 Publicado 2020-9-8 03:05 (0) (0)
Buenas,
¿Conseguiste el propósito?
Si pudiste cambiar el contraseña del wifi por comando ¿Podrías pasar el comando por aquí?
Gracias.  
jcaptiodv
jcaptiodv Publicado 2020-9-10 10:24:18
por comando no se puede lo intente de mil maneras y no lo logres llegue a utilizar un desarrollo en tr-069 bastante completo para esto lo cual me trae todo para el propósito de lo que queria
Ver más
  • x
  • convención：
pgladys
pgladys Publicado 2020-9-10 12:40:30
Gracias por el aporte!
Ver más
  • x
  • convención：
Volver a la lista

Comentar

Editor Avanzado
B Color Image Link Quote Code Smilies
Debe iniciar sesión para responder la publicación Inicio de sesión | Registrarse
Responder

Aviso: Para garantizar sus legítimos derechos e intereses, la comunidad y los terceros no publicarán contenido que pueda generar riesgos legales a las partes, por ejemplo, pornografía, contenido político, contenido sobre juego, consumo y tráfico de drogas, así como contenido que viole los derechos de propiedad intelectual de terceros, por ejemplo, secretos comerciales, marcas, derechos de autor, patentes y privacidad personal. No comparta su cuenta ni su contraseña con terceros. Todas las operaciones realizadas usando su cuenta se considerarán como sus acciones y todas las consecuencias que estas acciones generen serán responsabilidad suya. Para obtener información detallada, consulte la “ Política de privacidad.”

My Followers

¡Ingresa y disfruta de todos los beneficios para los miembros!

Inicia sesión
Sitio web de Huawei Soporte Acerca de Huawei Privacidad Acuerdo de usuario Términos de uso Cookies Configuración de Cookies

Póngase en contacto con nosotros: e_online@huawei.com Copyright © 2021 Huawei Technologies Co., Ltd. Todos los derechos reservados.

APP

Bloquear
¿Estás seguro de bloquear a este usuario?
Los usuarios en lista negra no pueden comentar tus publicaciones,no pueden mencionarte,no pueden enviarte mensajes privados.
Recordatorio
Agrega tu número de teléfono para obtener un bono de invitación.