Productos y versiones involucrados: Todos los productos y versiones.
Redes
Como se muestra en la Figura 1-1, Eth-Trunk3 se crea entre el Switch-1 y el Switch-2, y el Eth-Trunk20 se crea entre el Switch-2 y el Switch-3. Se crea un Eth-Trunk entre el Switch-2 y el NE40E. Eth-Trunk1 está ubicado en el Switch-2, y Eth-Trunk1.43 está ubicado en el NE40E.
Figura 1-1 Diagrama de red para la falla de que el servicio de IPTV es anormal después de que un Switch se apaga y se reinicia.
Síntoma de falla
Después de reiniciar el Switch-2, los usuarios conectados a la OLT se encuentran con servicios de IPTV anormales y no pueden ver programas de TV en vivo.
Análisis de causa
La interfaz Eth-Trunk20 del Switch-2 recibe paquetes PIM Hello de otras interfaces y los reenvía al NE40E. En este caso, el NE40E no se convierte en el PIM DR y el tráfico no se puede importar a la OLT conectada. Como resultado, los usuarios no pueden ver programas de multidifusión.
Procedimiento de resolución de problemas
Paso 1 Simule las solicitudes de multidifusión de los usuarios en la OLT. Se encuentra que las entradas de multidifusión se pueden generar en el Switch-1 en un período corto.
<Switch-1> display igmp-snooping port-info verbose
The port information of Group 239.16.10.6 on VLAN 43:
Time of this group has been up : 00:00:06
The port information of (0.0.0.0, 239.16.10.6):
Time of this source has been up : 00:00:06
Port Table on this source(0.0.0.0):
No.1
Port name : Eth-Trunk10
Time of this port has been up as a host-port : 00:00:06
Remain time of port expire as dynamic host-port : 00:02:06
Host-port flags : Dynamic
Paso 2 Inicie sesión en el NE40E y verifique la interfaz descendente Eth-Trunk1.43. Se encontró que hay cinco vecinos PIM y el PIM DR de la VLAN 43 no es el NE40E. Por lo tanto, el NE40E no puede importar tráfico de multidifusión a la OLT.
<NE40E> display pim neighbor
VPN-Instance: public net
Total Number of Neighbors = 11
Neighbor Interface Uptime Expires Dr-Priority BFD-Session
219.150.177.33 GE1/1/0 32w:5d 00:01:39 1 N
219.150.179.173 GE1/1/1 32w:5d 00:01:45 1 N
219.150.177.133 GE2/1/0 32w:5d 00:01:38 1 N
219.150.179.13 GE2/1/1 32w:5d 00:01:20 1 N
10.138.12.1 Eth-Trunk1.43 3d:09h 00:01:45 1 N
10.138.10.1 Eth-Trunk1.43 3d:09h 00:01:45 1 N
10.138.6.1 Eth-Trunk1.43 3d:09h 00:01:45 1 N
10.137.244.1 Eth-Trunk1.43 3d:09h 00:01:45 1 N
10.138.8.1 Eth-Trunk1.43 3d:09h 00:01:45 1 N
Paso 3 Inicie sesión en el Switch-2 e imprima la información de depuración. Se encuentra que los paquetes de saludo PIM con cinco direcciones IP de origen diferentes se reciben desde Eth-Trunk20
*43.3358195201 Switch-2 SNPG/7/PACKET:Received Packet (protocol = 103) from 10.138.8.1 to 224.0.0.13, type 0x20 on (VLAN 43 Eth-Trunk20 ) (SNPG_INIT2161)
*43.3358195202 Switch-2 SNPG/7/QUERY:Received hello packet with unsupported option: 65004,option ignored (SNPG_ROUTER1175)
*43.3358195202 Switch-2 SNPG/7/QUERY:Received pim hello packet. (SNPG_ROUTER1194)
*43.3358195203 Switch-2 SNPG/7/PACKET:Received a pim hello Packet from 10.138.8.1 to 224.0.0.13(SNPG_INIT2220)
*43.3358195204 Switch-2 SNPG/7/PACKET:Received Packet (protocol = 103) from 10.137.244.1 to 224.0.0.13, type 0x20 on (VLAN 43 Eth-Trunk20 ) (SNPG_INIT2161)
*43.3358195212 Switch-2 SNPG/7/QUERY:Received hello packet with unsupported option: 65004,option ignored (SNPG_ROUTER1175)
*43.3358195212 Switch-2 SNPG/7/QUERY:Received pim hello packet. (SNPG_ROUTER1194)
*43.3358195213 Switch-2 SNPG/7/PACKET:Received a pim hello Packet from 10.137.244.1 to 224.0.0.13(SNPG_INIT2220)
*43.3358195214 Switch-2 SNPG/7/PACKET:Received Packet (protocol = 103) from 10.138.12.1 to 224.0.0.13, type 0x20 on (VLAN 43 Eth-Trunk20 ) (SNPG_INIT2161)
*43.3358195214 Switch-2 SNPG/7/QUERY:Received hello packet with unsupported option: 65004,option ignored (SNPG_ROUTER1175)
*43.3358195215 Switch-2 SNPG/7/QUERY:Received pim hello packet. (SNPG_ROUTER1194)
*43.3358195215 Switch-2 SNPG/7/PACKET:Received a pim hello Packet from 10.138.12.1 to 224.0.0.13(SNPG_INIT2220)
*43.3358195216 Switch-2 SNPG/7/PACKET:Received Packet (protocol = 103) from 10.138.10.1 to 224.0.0.13, type 0x20 on (VLAN 43 Eth-Trunk20 ) (SNPG_INIT2161)
*43.3358195217 Switch-2 SNPG/7/QUERY:Received hello packet with unsupported option: 65004,option ignored (SNPG_ROUTER1175)
*43.3358195217 Switch-2 SNPG/7/QUERY:Received pim hello packet. (SNPG_ROUTER1194)
*43.3358195218 Switch-2 SNPG/7/PACKET:Received a pim hello Packet from 10.138.10.1 to 224.0.0.13(SNPG_INIT2220)
*43.3358195219 Switch-2 SNPG/7/PACKET:Received Packet (protocol = 103) from 10.138.6.1 to 224.0.0.13, type 0x20 on (VLAN 43 Eth-Trunk20 ) (SNPG_INIT2161)
*43.3358195219 Switch-2 SNPG/7/QUERY:Received hello packet with unsupported option: 65004,option ignored (SNPG_ROUTER1175)
*43.3358195220 Switch-2 SNPG/7/PACKET:Received a pim hello Packet from 10.138.6.1 to 224.0.0.13(SNPG_INIT2220)
Paso 4 Compruebe el Switch-2. Se encontró que hay dos interfaces ascendentes de multidifusión en la VLAN 43. Eth-Trunk20 se generó hace tres días.
<Switch-2> display igmp-snooping router-port vlan 43
Port Name UpTime Expires Flags
---------------------------------------------------------------------
VLAN 43, 2 router-port(s)
Eth-Trunk1 15w:5d 00:01:35 DYNAMIC
Eth-Trunk20 3d:09h 00:01:23 DYNAMIC
Paso 5 Verifique la configuración de Eth-Trunk20 en el Switch-2. Ejecute el comando undo port trunk allow-pass vlan 43 para restaurar el servicio actual
[Switch-2-Eth-Trunk20] display this
#
interface Eth-Trunk20
port link-type trunk
undo port trunk allow-pass vlan 1
port trunk allow-pass vlan 43 46 51 54 70 87 90 to 92 95 to 96 501 to 772 885 to 899
traffic-policy tttt outbound
undo port trunk allow-pass vlan 43