Propósito | Verificar que la función de seguridad de BGP esté habilitada. | |
Procedimiento | 1. Inicie sesión en el router PE 2. Ejecute el commando “display bgp peer 1.1.1.1 verbose” para comprobar que la seguridad de BGP esté habilitada | |
Resultados Esperados | 1. Mostrar que la seguridad de BGP está habilitada. <Huawei>display bgp peer 1.1.1.1 verbose
BGP Peer is 1.1.1.1, remote AS 65001 Type: IBGP link BGP version 4, Remote router ID 1.1.1.1 Update-group ID: 3 BGP current state: Established, Up for 6d02h25m34s BGP current event: KATimerExpired BGP last state: OpenConfirm BGP Peer Up count: 6 Received total routes: 0 Received active routes total: 0 Advertised total routes: 0 Port: Local - 179 Remote - 55260 Configured: Connect-retry Time: 32 sec Configured: Min Hold Time: 0 sec Configured: Active Hold Time: 180 sec Keepalive Time:60 sec Received : Active Hold Time: 180 sec Negotiated: Active Hold Time: 180 sec Keepalive Time:60 sec Peer optional capabilities: Peer supports bgp multi-protocol extension Peer supports bgp route refresh capability Peer supports bgp 4-byte-as capability Graceful Restart Capability: advertised Address family IPv4 Unicast: advertised and received Address family VPNv4 Unicast: advertised and received Received: Total 10142 messages Update messages 60 Open messages 1 KeepAlive messages 10081 Notification messages 0 Refresh messages 0 Sent: Total 10111 messages Update messages 21 Open messages 2 KeepAlive messages 10086 Notification messages 0 Refresh messages 2 Authentication type configured: MD5 | |
Resultado | Pass □ | Fail □ |
Observaciones |
| |
