COMPILACION DE COMANDOS DE DIAGNOSTICOS EN OLTs HUAWEI | MA56xT

Última respuesta mzo. 08, 2019 18:23:53 945 2 13 10

Estimados sigue abajo una pequena compilacion de comandos utiles para diagnosticos en OLTs .


Verificar una ONT

huawei#display ont info

{ by-desc<K>|by-ip<K>|by-loid<K>|by-mac<K>|by-password<K>|by-sn<K>|framid<U><0,

1>}:0

{ all<K>|slotid<U><0,22>}:3

{ all<K>|portid<U><0,15> }:0

{ all<K>|ontid<U><0,127>  }:0

 

  Command:

          display ont info 0 3 0 0

  -----------------------------------------------------------------------------

  F/S/P                   : 0/3/0

  ONT-ID                  : 0                                                     

  Control flag            : active                                                 

  Run state               : online                                                

  Config state            : normal                                                

  Match state             : mismatch                                               

  ONT LLID                : 1                                                     

  ONT distance(m)         : 66

  ONT RTT(TQ)             : 55

  Memory occupation       : 10%

  CPU occupation          : 10%

  Temperature             : 20(C)

  Authentic type          : password-auth                                         

  Discovery mode          : always-on mode                                        

  Discovery state         : on                                                     

  MAC                     : 3030-3733-2D30

  Password                : 0000000000                                             

  Management mode         : OAM                                                   

………

 

Verificar trafico en la puerta PON

huawei(config-if-gpon-0/3)#display port traffic                                
{ portid<U><0,3> }:0                                                            
                                                                                
  Command:                                                                      
          display port traffic 0                                                
                                                                                
huawei(config-if-gpon-0,3)#                                                    
 ----------------------------------------------------------------               
  Traffic Information                                                           
 ----------------------------------------------------------------               
 Up traffic (kbps)          :  0                                                
 Down traffic (kbps)        :  0                                                
 ---------------------------------------------------------------- 

 

Verificar la configuración de um puerto PON

huawei(config-if-gpon-0/3)#display port info
{ portid<U><0,3> }:0
 
  Command:
          display port info 0
  --------------------------------------------------------
  F/S/P                                      0/3/0
  Min distance(km)                           0                                  
  Max distance(km)                           20                                 
  Left guaranteed bandwidth(kbps)            1238784                            
  Number of T-CONTs                          0                                  
  Autofind                                   Disable                            
  FEC check                                  Disable                            
  Admin State                                On                                 
  ONT encryption key switching interval(m)   Disable                            
  PON-ID switch                              Enable                             
  PON-ID identifier                          0/3/0                              
  Jumbo frame switch                         Disable                            
  Surplus bandwidth assignment               Enable
  Best-effort bandwidth assignment           Rate-proportion
  --------------------------------------------------------   

 

Verificar el  status de una puerta PON (Potencia/Temperatura)

huawei(config-if-gpon-0/4)#display port state 0                                
  
  ----------------------------------------------------------------------------  
  Port Information                                                              
  ----------------------------------------------------------------------------  
  F/S/P                        0/4/0                                            
  Port state                   Offline                                          
  Last down cause              -                                                
  Last up time                 -                                                
  Last down time               -                                                
  Port energy-saving flag      No                                               
  xPON MAC chipset state       Normal                                           
  Signal detect                Normal                                           
  Available bandwidth(Kbps)    1241088                                          
  Illegal rogue ONT            Inexistent                                       
  ----------------------------------------------------------------------------  
  Optical Module State                                                          
  ----------------------------------------------------------------------------  
  Optical Module status        Online                                           
  Laser state                  Normal                                           
  TX fault                     Normal                                           
  Temperature(C)               31                                               
  TX Bias current(mA)          10                                               
  Supply Voltage(V)            3.20                                             
  TX power(dBm)                3.49                                             
  ----------------------------------------------------------------------------  
………

 

Verificar las estatísticas de una puerta PON

huawei(config-if-gpon-0/3)#display statistics port ethernet             
{ portid<U><0,3> }:0       
                                                                                
  Command:                                                                      
          display statistics port ethernet  0
  -----------------------------------------------------------------------------                  
  Received frames                     :               9000 100%
  Received bytes                      :             430000
  Received unicast frames             :                  2   0%
  Received multicast frames           :                  3   0%
  Received broadcast frames           :               8995  99%
 
  Received 64-byte frames             :                  0   0%
  Received 65~127-byte frames         :                  0   0%
  Received 128~255-byte frames        :                  0   0%
  Received 256~511-byte frames        :                  0   0%
  Received 512~1023-byte frames       :                  0   0%
  Received 1024~1518-byte frames      :                  0   0%
  Received over 1518-byte frames      :                  0   0%
  Received undersize discarded frames :                  0   0%
  Received oversize discarded frames  :                  0   0%
  Received CRC error frames           :                  0
  Received discarded frames           :                  11  1% 
  Received error frames               :                  12  1%
 
  Sent frames                         :               9500 100%
  Sent bytes                          :            4302000
  Sent unicast frames                 :                 20   0%
  Sent multicast frames               :                500   5%
  Sent broadcast frames               :               8980  94%
 
  Sent 64-byte frames                 :                900   9%
  Sent 65~127-byte frames             :                 90   0%
  Sent 128~255-byte frames            :                 80   0%
  Sent 256~511-byte frames            :               8430  88%
  Sent 512~1023-byte frames           :                  0   0%
  Sent 1024~1518-byte frames          :                  0   0%
  Sent over 1518-byte frames          :                  0   0%
  Sent multicast bytes                :                  0
  ----------------------------------------------------------------------------- 

 

Verificar la configuracion de un Service Port

huawei#display service-port
{ all<K>|autosense<K>|board<K>|connect-oriented<K>|desc<K>|index<U><0,32767>|num
ber<K>|port<K>|vlan<K> }:100
 
  Command:
          display service-port 100
  ----------------------------------------------------------
  Index               : 100
  VLAN ID             : 100
  VLAN attr           : common
  Port type           : vdl
  F/S/P               : 0/3/4
  VPI                 : -
  VCI                 : -
  Flow type           : -
  Flow para           : -
  TX                  : -
  Inbound table name  : -
  RX                  : -
  Outbound table name : -
  Admin status        : enable
  State               : down
  Label               : -
  Priority            : -
  PVC bundle          : no
  Channel             : 1
  Max MAC count       : 255
  Tag transform       : default
  Description         :
  Remote description  :
  Service-port bundle : -
  Cos                 : -
  Car-Group           : -
  Static MAC          :
  IP address          :
  ----------------------------------------------------------
  Note: F--Frame, S--Slot, P--Port
        v/e--vlan/encap
        Dvlan--double vlan
        pritag--priority-tagged, ppp--pppoe, ip--ipoe, ip4--ipv4oe, ip6--ipv6oe
        When the traffic-table is not configured, the system does
        not limit the traffic rate and the priority is set to 0

 

Verificar trafico de un Service Port

huawei#display traffic service-port     
{ index<U><0,32767> }: 0
                                                                                
  Command:                                                                      
          display traffic service-port 0                                        
  --------------------------------------------------------------                
  Service-port        Upstream(Kbps)         Downstream(Kbps)                   
  --------------------------------------------------------------                
             0                10240                    20480                   
  -------------------------------------------------------------- 

 

Verificar estatísticas de un Service Port

huawei#display statistics service-port
{ <cr>|index<U><0,32767> }:1
 
  Command:
          display statistics service-port 1
 Number of upstream bytes             : 0
 Number of upstream packets           : 0
 Number of upstream discard packets   : 0
 Number of downstream bytes           : 0
 Number of downstream packets         : 0
 Number of downstream discard packets : 0

 

Verificar e trafico de uma puerta ETH

huawei(config-if-eth-0/3)#display port traffic
{ portid<U><0,7> }:0
 
  Command:
          display port traffic 0
  The received traffic of this port(packets/s)                    =0
  The received traffic of this port(octets/s)                     =0
  The received traffic of this port(kbits/s)                      =0.0
  The transmitted traffic of this port(packets/s)                 =0
  The transmitted traffic of this port(octets/s)                  =0
  The transmitted traffic of this port(kbits/s)                   =0.0

 

Verificar las estatísticas de una porta ETH

huawei(config-if-eth-0/3)#display port statistics
{ portid<U><0,7> }:0
 
  Command:
          display port statistics 0
  
  Number of transmitted frames                         : 0
  Number of received frames                            : 0
  Total number of frames                               : 0
  Number of transmitted multicast frames               : 0
  Number of received multicast frames                  : 0
  Total number of multicast frames                     : 0
  Number of transmitted broadcast frames               : 0
  Number of received broadcast frames                  : 0
  Total number of broadcast frames                     : 0
  Number of transmitted unicast frames                 : 0
  Number of received unicast frames                    : 0
  Total number of unicast frames                       : 0
  Number of transmitted pause frames                   : 0
  Number of received pause frames                      : 0
  Number of transmitted octets                         : 0
  Number of received octets                            : 0
  Total number of octets                               : 0
  Number of alignment error frames                     : 0
………

 

Verificar el status de uma puerta ETH

huawei(config-if-giu-0/19)#display port state
{ all<K>|portid<U><0,1> }:0
 
  Command:                                                                      
          display port state 0                                                  
  The port is active                                                            
  Native VLAN ID is 1                                                           
  Ethernet port is online                                                       
  Ethernet port is auto-negotiation to full duplex                              
  Ethernet port rate is auto-negotiation to 100M                                
  Ethernet port does not support flow control                                   
  Ethernet port does not support jumbo frame                                    
  Line-adaptive function of the ethernet port is auto-negotiation               
  Ethernet port network-role is uplink                                          
  The ID of 15min-alarm profile for the port is invalid                         
  The ID of 15min-warning profile for the port is invalid                       
  The ID of 24hour-alarm profile for the port is invalid                        
  The ID of 24hour-warning profile for the port is invalid                      
  Note: For any port, setting MDI to auto-negotiation is invalid, For a 1000 M  
        Electrical port in the full-duplex mode, setting MDI to any value is    
        invalid                             

 

Verificar el status de un módulo óptico en una puerta EHT

huawei(config-if-opg-0/3)#display port opticstate
{ all<K>|portid<U><0,47> }:0
{ <cr>|extend<K>|remote<K> }: extend
{ <cr>|remote<K> }: 
 
  Command:                                                                      
          display port opticstate 0 extend                                      
  SmartSFP Identifier             : SmartSFP I                                  
  SmartSFP ProtocolVersion        : 1                                           
  SmartSFP SFPEnhancedOption      : 0x1f                                        
  SmartSFP Password               : 0x00000000                                  
  SmartSFP RemoteControlable      : Enable                                      
  SmartSFP SubCarrierControl      : Enable                                      
  SmartSFP SubCarrierlinkStatus   : Linked down                                 
  SmartSFP LocalLoopback          : Local no loop back                          
  SmartSFP DyingGaspStatus        : Remote normal power                         
  SmartSFP LocalRXOutputControl   : Enable                                      
  SmartSFP PilottoneControl       : -                                           
  SmartSFP PilottoneStatus        : -                                           
  SmartSFP Loopbackdeviceloss     : -                                           
  SmartSFP Roundtripfiberloss     : -                                           

Verificaar la interfaz de Gerencia METH

huawei#display interface meth 0 
                                                                                
  Command:                                                                      
          display interface meth 0                                              
meth0 current state : UP                                                        
Line protocol current state : UP                                                
Description : HUAWEI, SmartAX Series, meth0 Interface                            
The Maximum Transmit Unit is 1500 bytes
Internet Address is 10.71.55.193/24                                             
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 00e0-fc11-1234 
Auto-duplex(Full), Auto-speed(100M)                                             
    5 minutes input rate 197 bytes/sec, 2 packets/sec                           
    5 minutes output rate 25 bytes/sec, 0 packets/sec                           
    3726532 packets input, 488633853 bytes                                      
    428183 packets output, 29173130 bytes     

Verificar una interfaz VLAN

huawei(config)#display interface vlanif 2
 
  Command:
          display interface vlanif 2
vlanif2 current state : UP
Line protocol current state : DOWN
Description: HUAWEI, SmartAX Series, vlanif2 Interface
The Maximum Transmit Unit is 1560 bytes
Forward plane MTU is 1560 bytes
Internet protocol processing : disabled
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 00e0-fc11-2233
VLAN Encap-mode : double-tag, inner-label is 2

 

Listar los Line Profiles

huawei#display ont-lineprofile gpon
{ all<K>|bound-info<K>|profile-id<K>|profile-name<K> }:all                                    
                                                                                
  Command:                                                                      
          display ont-lineprofile gpon all                                      
  -----------------------------------------------------------------------------
  Profile-ID  Profile-name                                Binding times
  -----------------------------------------------------------------------------
  0           line-profile_default_0                      0
  1           line-profile_1                              1
  -----------------------------------------------------------------------------
  Total: 2

 

Verificar un Line Profile

huawei#display ont-lineprofile gpon
{ all<K>|bound-info<K>|profile-id<K>|profile-name<K> }:profile-id                           
{ profile-id<U><0,8192> }:10                                                    
                                                                                
  Command:                                                                      
          display ont-lineprofile gpon profile-id 10                            
  -----------------------------------------------------------------------------
  Profile-ID          :10
  Profile-name        :line-profile_10
  Access-type         :GPON
  -----------------------------------------------------------------------------
  FEC upstream switch :Disable
  OMCC encrypt switch :Off
  Qos mode            :PQ
  Mapping mode        :PORT+VLAN
  TR069 management    :Disable
  TR069 IP index      :0  
  -----------------------------------------------------------------------------
  Bundle-ID           Port-list
  -----------------------------------------------------------------------------
  0                   1,2
  1                   3,4
  2                   5,6
  -----------------------------------------------------------------------------
  <T-CONT   0>          DBA Profile-ID:1
   <Gem Index 0>
……… 

 

Listar los Service Profile

huawei#display ont-srvprofile gpon
{ all<K>|bound-info<K>|profile-id<K>|profile-name<K> }:all
 
  Command: 
          display ont-srvprofile gpon all
  -----------------------------------------------------------------------------
  Profile-ID  Profile-name                                Binding times
  -----------------------------------------------------------------------------
  0           srv-profile_default_0                       0
  1           srv-profile_1                               1
  -----------------------------------------------------------------------------
  Total: 2

 

Verificar un Service Profile

huawei#display ont-srvprofile gpon
{ all<K>|bound-info<K>|profile-id<K>|profile-name<K> }:profile-id 
{ profile-id<U><0,8192> }:2
 
  Command:
          display ont-srvprofile gpon profile-id 2
  -----------------------------------------------------------------------------
  Profile-ID  : 2
  Profile-name: srv-profile_2
  Access-type : GPON
  -----------------------------------------------------------------------------
  Port-type     Port-number
  -----------------------------------------------------------------------------
  POTS          1
  ETH           adaptive
  VDSL          8
  TDM           1
  MOCA          1
  CATV          1
  -----------------------------------------------------------------------------
  TDM port type                     : E1
  TDM service type                  : TDMoGem
  MAC learning function switch      : Enable
  ONT transparent function switch   : Disable
  Multicast forward mode            : Unconcern
  Multicast forward VLAN            : -
  Multicast mode                    : Unconcern
  Upstream IGMP packet forward mode : Unconcern
  Upstream IGMP packet forward VLAN : -
  Upstream IGMP packet priority     : -
  Native VLAN option                : Concern
  Upstream PQ color policy          : -
  Downstream PQ color policy        : -
………

 

Listar los DBA Profile

huawei(config-if-gpon-0/3)#display dba-profile                                                    
{ all<K>|profile-id<K>|profile-name<K> }:all                                    
{ <cr>|detail<K> }:
                                                                                
  Command:                                                                      
          display dba-profile all                                             
  ----------------------------------------------------------------------------  
  Profile-ID   type   Bandwidth      Fix        Assure        Max        Bind   
                     compensation    (kbps)     (kbps)        (kbps)     times  
  ----------------------------------------------------------------------------  
           0      3           No          0       8192         20480         1  
           1      1           No       5120          0             0         3  
           2      1           No       1024          0             0         0  
           3      4           No          0          0         32768         0  
           4      1           No    1024000          0             0         0  
           5      1           No      32768          0             0         0  
           6      1           No     102400          0             0         0  
           7      2           No          0      32768             0         0  
           8      2           No          0     102400             0         0  
           9      3           No          0      32768         65536         0  
          10      1           No       2752          0             0         0  
          20      5           No       2048       2048         10240         0  
  ----------------------------------------------------------------------------  

 

Verificar un DBA Profile

huawei(config-if-gpon-0/3)#display dba-profile                                                    
{ all<K>|profile-id<K>|profile-name<K> }:profile-id                             
{ profile-id<U><0,512> }:20                                                     
                                                                                
  Command:                                                                      
          display dba-profile profile-id 20                                   
  ----------------------------------------------------------------------------  
  Profile-name :            dba-profile_20                                   
  Profile-ID:               20                                                  
  type:                     5                                                   
  Bandwidth compensation:   No 
  Fix-delay:                No                                                 
  Fix(kbps):                2048                                                
  Assure(kbps):             2048                                                
  Max(kbps):                10240 
  Additional-bandwidth:     best-effort         
  Best-effort-priority:     0
  Best-effort-weight:       10                                              
  bind-times:               0
  ----------------------------------------------------------------------------  

 

Verificar tabla de ruteamiento multicast

huawei#display multicast routing-table
Multicast routing table:
 Total 1 entry
 00001. (172.16.0.2, 1.2.3.4)
       Uptime: 00:00:28
       Upstream Interface: Vlanif10
       List of 2 downstream interfaces
           1:  Vlanif20
           2:  Vlanif30

Verificar estatísticas del fluxo multicast

huawei#display multicast flow-statistic                             
{ index<K>|ip<K>|ipv6<K>|uplink-port<K>|vlan<K> }:vlan                                        
{ vlanid<U><1,4093> }:1
{ ip<K>|ipv6<K> }:ip                                                                    
{ ip-addr<I><X.X.X.X> }:224.1.1.1
{ <cr>|sourceip<K> }:                                               
                                                                                
  Command:                                                                      
          display multicast flow-statistic vlan 1 ip 224.1.1.1            
  Command is being executed. Please wait...                                     
  Multicast flow statistic result: 0(kbps)              

Verificar tabla de utilizacion del multicast (Canal e usuários)

huawei#display multicast forwarding-table                                        
{ frameid/slotid/portid<S><Length 5-18> }:0/3/0                                                         
{ ont<K> }:ont                                                      
{ ontid<U><0,63> }:2
{ <cr>|eth<K>|verbose<K> }:
                                                                               
  Command:                                                                      
           display multicast forwarding-table 0/3/0 ont 2 
 -----------------------------------------------------------------------------
 Group addr       Source IP        VLAN  ONT-port  Client IP        Age(second)
 ------------------------------------------------------------------------------
 00E0-FC00-0000   192.168.1.123    4093  4         192.168.200.200  86401
 224.1.1.1        192.168.1.124    1     SSID      192.168.200.201  86401
 ------------------------------------------------------------------------------
Total : 2
Note: "SSID" indicates the SSID of the WiFi interface

Verificar estatísticas de puerta multicast

huawei(config)#display statistics multicast port
{ <cr>|frameid/slotid/portid<S><Length 5-18> }:0/3/0
 
  Command:
          display statistics multicast port 0/3/0
  --------------------------------------------------------------------------
  Frame ID/Slot ID/Port ID : 0/3/0
  VLAN ID                  : 5
  Program IP address       : 224.0.1.1
  Source IP address        : 192.168.100.152
  Transmit packets         : 0
  Transmit bytes           : 0
  Transmit rate(pps)       : 0
  Transmit speed(kbps)     : 0  

Verificar el camino del servicio de  multicast

huawei#display multicast forwarding-path                                        
{ groupip<K> }:groupip                                                          
{ groupip-addr<I><X.X.X.X> }:232.1.1.1                                          
{ sourceip<K> }:sourceip                                                        
{ sourceip-addr<I><X.X.X.X> }:10.2.3.4                                     
                                                                                
  Command:                                                                      
          display multicast forwarding-path groupip 232.1.1.1 sourceip 10.2.3.4 
  ------------------------------------------------------------
  Upstream interface   : vlanif 200 
  Downstream interface : vlanif 20
  Downstream port      : 0/4/0
  Downstream slot      : 0/3
  ------------------------------------------------------------

 

huawei(config-if-gpon-0/3)#display dba-profile                                                    
{ all<K>|profile-id<K>|profile-name<K> }:profile-id                             
{ profile-id<U><0,512> }:20                                                     
                                                                                
  Command:                                                                      
          display dba-profile profile-id 20                                   
  ----------------------------------------------------------------------------  
  Profile-name :            dba-profile_20                                   
  Profile-ID:               20                                                  
  type:                     5                                                   
  Bandwidth compensation:   No 
  Fix-delay:                No                                                 
  Fix(kbps):                2048                                                
  Assure(kbps):             2048                                                
  Max(kbps):                10240 
  Additional-bandwidth:     best-effort         
  Best-effort-priority:     0
  Best-effort-weight:       10                                              
  bind-times:               0
  ---------------------------------------------------------------------------- 

 


  • x
  • convención:

user_3231993
Publicado 2019-3-1 12:34:12 Útil(1) Útil(1)
Muy buena compilacion. Gracias !
  • x
  • convención:

Hemingway
Moderador Publicado 2019-3-8 18:23:53 Útil(0) Útil(0)
Felicidades has sido ganador de la competencia. No olvides visitar el siguiente link para más información. https://forum.huawei.com/enterprise/es/thread-508365.html
  • x
  • convención:

Responder

Responder
Debe iniciar sesión para responder la publicación Inicio de sesión | Registrarse

Aviso Aviso: Para garantizar sus legítimos derechos e intereses, la comunidad y los terceros no publicarán contenido que pueda generar riesgos legales a las partes, por ejemplo, pornografía, contenido político, contenido sobre juego, consumo y tráfico de drogas, así como contenido que viole los derechos de propiedad intelectual de terceros, por ejemplo, secretos comerciales, marcas, derechos de autor, patentes y privacidad personal. No comparta su cuenta ni su contraseña con terceros. Todas las operaciones realizadas usando su cuenta se considerarán como sus acciones y todas las consecuencias que estas acciones generen serán responsabilidad suya. Para obtener información detallada, consulte la “ Política de privacidad.”
Si el botón para adjuntar no está disponible, actualice Adobe Flash Player con la versión más reciente
¡Ingresa y disfruta de todos los beneficios para los miembros!

¡Ingresa y disfruta de todos los beneficios para los miembros!

Aterrizaje