¿Cómo se configura un usuario local AAA en un AR?

Primer paso
system-view
aaa

Segundo paso
(Opcional) user-password complexity-check
(Opcion a) local-user user-name password
(Opcion b) local-user user-name password { cipher | irreversible-cipher } password
local-user user-name service-type { 8021x | bind | ftp | http | ppp | ssh | sslvpn | telnet | terminal | web | x25-pad }
(Opcional) local-user user-name bind-ip ip-addres

Tercer paso (Opcional)
local-user user-name privilege level level
local-user user-name user-group group-name
local-user user-name time-range time-name
local-user user-name idle-timeout minutes [ seconds ] or local-user user-name idle-cut
local-user user-name access-limit max-number

Cuarto paso (Opcional)
local-aaa-user wrong-password retry-interval retry-interval retry-time retry-time block-time block-time
aaa-quiet administrator except-list { ipv4-address | ipv6-address } &<1-32>
local-aaa-user password policy access-user
password history record number number
quit
local-aaa-user password policy administrator
password alert before-expire day
password alert original
password expire day
password history record number number
quit