ZTP issue

Do you mean you need to use EasyDeploy to deploy unconfigured devices?

Hi,

We have this model Quidway S2700-52P-EI-AC with software version V100R006C05.
When we power on the switch for the first time all is ok, configuration is deploy on it.
But for some reason we have to reset it to reinstall it. So we paste the commands to reset it to default factory.
After the reboot he never catch is configuration.
So i would like to know if there is some commands to paste after the reset ?

EasyDeplloy don't work like ZTP ?

regards

EasyDeploy does work like ZTP, but your device model doesn‘t support this function. You can only manually configure it.
For details, see
http://support.huawei.com/hedex/hdx.do?docid=EDOC1000135317&id=dc_cfg_easy_1012_2&text=Licensing%252520Requirements%252520and%252520Limitations%252520for%252520EasyDeploy&lang=en

@user_3062441 hello, ZTP requires the esight, DHCP server and file server. The client device(S2700) need to download the configuration from the file server.
you can check this https://support.huawei.com/enter ... 310?idPath=24030814

If all the parts are ready while the ZTP is failure either, you are kindly advised to check the connection between the client, the DHCP server and file server. Then the validity of the client switch.

Hello,

dhcp server and file server are already configured.
When we start for a first time Huawei S2700 switch no issue the switch catch the configuration.
But When we do a factory reset with the command describe in the post, the switch restore to factory never catch his configuration again. So we try to understand why.