Would like to share the introduction series of VxLAN to you--VXLAN Functions-ARP Proxy and Broadcast-to-Unicast Conversion

Latest reply: Dec 29, 2018 02:58:55 244 5 10 0

Reducing ARP Broadcast on a VXLAN Network — ARP Proxy


164557eqtjhatjhtbffmtf.png

lThe SDN controller obtains VM information from the cloud platform to generate the ARP cache.

lThe ingress NVE obtains the broadcast ARP requests and sends them to the control plane (SDN controller) for processing.

lThe SDN controller parses the ARP requests and queries the ARP cache for the requested destination address.

lIf the destination address is found, the SDN controller unicasts the ARP reply to the destination address and terminates the ARP broadcast packet.

lIf the destination address is not found, the SDN controller forwards the packet to the ingress NVE. The source interface triggers a prune-flood process. The destination host replies to the request.


Reducing ARP Broadcast on a VXLAN Network — Broadcast-to-Unicast Conversion

164800td789m79b9clj7ba.png

lIn this mode, network devices will not terminate ARP requests

lThis mode is recommended for the following reasons:

l1. In addition to address resolution, ARP also provides other functions such as virtual cluster detection and NIC status detection.

l2. The ARP protocol stack implementation may differ on different hosts.

lThis mode can ensure that ARP requests can be received by destination hosts and will not be terminated on network devices.

  • x
  • convention:

yiyi0519
Created Dec 26, 2018 00:54:08 Helpful(0) Helpful(0)

VXLAN uses UDP to encapsulate Layer 2 packets. It is more flexible and more convenient to maintain than VPLS.
  • x
  • convention:

yjhd
Created Dec 26, 2018 09:02:48 Helpful(0) Helpful(0)

very good
  • x
  • convention:

GongXiaochuan
Created Dec 28, 2018 03:11:55 Helpful(0) Helpful(0)

The broadcast request is treated as multidestination traffic that is typically VXLAN encapsulated and sent to every VTEP or edge device that is a member of the corresponding Layer 2 VNI. The response to the ARP request is typically sent as a unicast packet to the requestor
  • x
  • convention:

Good Good Study Day Day Up
Torrent
Created Dec 29, 2018 01:44:44 Helpful(0) Helpful(0)

In this mode, network devices will not terminate ARP requests.

lThis mode is recommended for the following reasons:

l1. In addition to address resolution, ARP also provides other functions such as virtual cluster detection and NIC status detection.

l2. The ARP protocol stack implementation may differ on different hosts.

lThis mode can ensure that ARP requests can be received by destination hosts and will not be terminated on network devices.

thanks for sharing, learned a lot.
  • x
  • convention:

Finn92
Created Dec 29, 2018 02:58:55 Helpful(0) Helpful(0)

The SDN controller obtains VM information from the cloud platform to generate the ARP cache.
lThe ingress NVE obtains the broadcast ARP requests and sends them to the control plane (SDN controller) for processing.

good sharing , mark .
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login