problem
=========
As per the customer requirement Configure AC Controller’s in Active and Standby mode.
After the VRRP Configurations on ACU2 Controller’s. One ACU2 acting like Master and another is Backup. For testing when I plug out the Master ACU2 cable the Backup became the Master as per VRRP basic principle and vice versa but there is some abnormal behavior which I observed.
Solution
========
After analysis I found that in WLAN environment vrrp is not working standalone for Active/Standby environment its work with HSB. Under the HSB configuration we call the vrrp.
Primary Controller HSB Group and Service Output With VRRP.
VRRP Status of Primary ACU2
AP’s Status of Primary ACU2
Secondary ACU2 Hsb Group and Service output with VRRP
Secondary VRRP Status
AP’s Status of Secondary ACU2
