Got it

Wireless Slow Speed performance on AC6006

Latest reply: Apr 6, 2017 00:36:53 1274 2 0 0 0

Hi,

there was no interference between APs and CCM encryption was configured, but slow speed was encountered even if the client was right next to AP with maximum signal and only one connected to the network.

Next step was to verify the clients connected to SSIDs, with below commands:

   (Huawei)display station assoc-info all                                       

                // will  display all the clients connected to Wireless network

   (Huawei)display station assoc-info sta xxxx-xxxx-xxxx               

                // will display all the information regarding a client (identified by MAC address), xxxx-xxxx-xxxx represents the Mac address



<HAS-WAC>display station assoc-info sta 1c56-fe04-5259          //below is the client's\STA's, connected to the wireless network, information
  ------------------------------------------------------------------------------
  Station mac-address                       : 1c56-fe04-5259
  Station ip-address                        : 10.2.18.27
                                            : FE80::1E56:FEFF:FE04:5259
  Station gateway                           : 10.2.18.1
  Associated SSID                           : Test
  Station online time(ddd:hh:mm:ss)         : 000:00:44:15
  The upstream SNR(dB)                      : 37.0
  Station connect rate(Mbps)                : 45
  Station connect channel                   : 6
  Station inactivity time(ddd:hh:mm:ss)     : 000:00:00:00
  Station current state
    Authorized for data transfer            : YES
    Qos enabled                             : YES
    ERP enabled                             : YES
    HT rates enabled                        : YES
    Power save mode enabled                 : YES
    Auth reference held                     : No
    UAPSD enabled                           : No
    UAPSD triggerable                       : No
    UAPSD SP in progress                    : No
    This is an ATH node                     : No
    WDS workaround req                      : No
    WDS link                                : No
  Station's HT capability                   : P
  Station ERP element                       : 0
  Station capabilities                      : EPSs
  Station's RSSI(dBm)                       : -71
  Station's Noise(dBm)                      : -108
  Station's radio mode                      : 11n
  Station's AP ID                           : 1
  Station's Radio ID                        : 0
  Station's Authentication Method           : WPA2-PSK
  Station's Cipher Type                     : CCMP
  Station's User Name                       : 1c56fe045259
  Station's Vlan ID                         : 218
  Station's Channel Band-width              : 20MHz
  Station's asso BSSID                      : 70d9-311a-2304
  Station's state                           : Asso with auth
  Station's Qos Mode                        : WMM
  Station's HT Mode                         : HT20
  Station's MCS value                       : 7                                         //the client connected to network, is MCS class 7
  Station's Short GI                        : nonsupport
  Station's roam state                      : Yes

thank you
View more
  • x
  • convention:

=>if you take a look into below 802.11n standard table, the client(sta) is from MCS class 7 (1xMIMO, 20Mhz), therefore the Speed will be 65MBs => download speed will be: 65/8 =  8 MBs, so in our case 10MBS is ok.
                                =>the limitation is no given by AP, in this case the limitation of speed is given by MCS class(7) of the CLIENT which connects to wireless.
                                =>with other words, the STA connected to Wireless network it is an 1x MIMO client, MCS class 7, supports speed to 65 MB\s in 20MHz channel.
                                =>a STA with higher MCS value, connected to your Wireless network, will have higher speed, of course depending how many STAs are connected to network.

7a8a863f6690495ab629ccedd3757a31

View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.