Why Web lct taking too much time to search for NE

Hello,
Synchronizing the NE Time with the U2000/Web LCT Server Manually

For NEs that do not have the NTP service configured, check whether the NE time is consistent with the U2000/Web LCT server time, so that the U2000/Web LCT can correctly record the time that an alarm is generated. Otherwise, manually synchronize the NE time with the time of the U2000/Web LCT server.

Procedure on the Web LCT

• In the NE Explorer, select the NE. Choose Configuration > NE Time Synchronization from the Function Tree.

• Set Synchronous Mode to NM and then click Apply.

• Right-click the NE and then choose Synchronize with NM Time. In this manner, the NE time is synchronized with the NMS time immediately.

For more detail
https://forum.huawei.com/enterprise/en/how-to-synchronize-the-ne-time-with-the-u2000-web-lct-server-manually-osn6800-3800/thread/457605-871

Hope it help
Thanks

Hi there！

If the Web LCT is properly communicating with a GNE, the NEs that communicate with the GNEs can be searched based on the IP address or network segment of the GNE and then created in batches.

If you search by network address segment, the LCT scans all IP addresses that you enter in the address segment. In this case, it will take you longer.

If you know the GNE IP address, you are advised to use the GNE IP address method to search for the GNE IP address, which is much faster.

If you know the number of NEs on the network, you can stop the search immediately after the LCT finds them. If you need to make it stop automatically, it will take at least 3-5 minutes.

Thank you！