Why we can't see the real value for a license item on eCNS600

If you use the command below to check the license items you will observe that for many items that the value is 1.

This means that the feature is available and it is not the real value.

%%DSP LICENSE:;%%

RETCODE = 0  Operation succeeded

Current license information from DEV:

-------------------------------------

                            License file name  = xxxxxxxxxx.dat

                                          ESN  =  xxx;xxx

                                Running phase  =  Normal

                          License remain days  =  Permanence

                                      Feature  =  eCNSRF

                                Running phase  =  Normal

                          License remain days  =  Permanence

             Maximum Number of 4G Subscribers  =  1600

                 Maximum Number of 4G Bearers  =  4800

                    Throughput Capacity(Mbps)  =  6000

                                eNodeB Number  =  38

NAS Encryption and Integrity Protection (AES)  =  1

                 Static IP Address Allocation  =  1

                SPI based QoS profile control  =  1

                             Offline Charging  =  1

                            Routing behind MS  =  1

                                        L2VPN  =  1

(Number of results = 1)

If you search in eCNS600 documenation, you will find that:

If you find it usefull, hit the "helpful button :)