Hello, everyone!
Today, I'd like to share a case with you.
Problem description:
The Product Model is: SmartAX MA5633
R17C00
Multicast streams are not working on CMC MA5633.
Below added 2 lines for the multicast protocol (igmp version 2) but missing the multicast streams on the TV set or with VLC on my PC.
[btv-config]
<btv-config>
cable multicast authorization enable default-action permit max-sessions 16
cable multicast igmp-version v2
MA5633#display cable multicast config
----------------------------------------------------
Multicast Authorization : enable
Default Authorization Action : permit
Default Maximum Number of Sessions : 16
Multicast DSID Forwarding (MDF) : enable
Multicast VLAN : -
IGMP Version : v2
Multicast Balancing Policy : session-based
Solution :
The version of MA5633 is R17C00 now, the version of R17C00 is not fully supported for multicast. It is recommended to upgrade the R18C00 version before testing again.
Also We need to add two below configuration:
cable service-class name test downstream priority 5
cable multicast group QoS default service-class test
and modified one configuration:
ICMP mode snooping à igmp mode proxy
Then we reset the CM 1, it works after online.
For CM 2, we did nothing changed compare to CM 1.
After upgrading the firmware to R18 and also adding above IGMP configuration, Multicast streamlining starts working properly.
Welcome to leave a message below.
We study together.
Thank you!
