Hello everyone,
Today I will share the reason for displaying radio member traffic information inaccurate.
When you display information about all load balancing groups, the radio member traffic information is inaccurate. The possible causes are as follows:
Radio frequency does not work up to snuff and upstream and downstream services are abnormal.
Check whether the AP reports traffic information at a regular interval of the 30s: run the display load-balance-group all command in V200R006 and earlier versions, and the display sta-load-balance static-group command in V200R006 and later versions.
Traffic information in the packets reported by the AP is inaccurate.
The AC does not receive or correctly process the packets reported by the AP.
That is all I want to share with you! Thank you!
