Why firmware version S3328 V100R005c01SPC100 can‘t view Fiber transceiver inform

Latest reply: Jan 22, 2013 05:06:08 5943 2 0 0

i just do compare with version S3328 V100R003C00SPC301 please refer below ( attached picture version S3328 V100R005c01SPC100)  :

<UHKTSIT-KTS01>dis ver

Huawei Versatile Routing Platform Software

VRP (R) Software, Version 5.30 (S3328 V100R003C00SPC301)

Copyright (C) 2008-2009 Huawei Technologies Co., Ltd.

Quidway S3328TP-EI uptime is 1 day, 1 hour, 10 minutes



[Unit 0] EOFEA uptime is 1 day, 1 hour, 10 minutes

128M bytes DDR Memory

16M bytes FLASH

Pcb      Version : CX22EOFEA REV B

Basic  BOOTROM  Version :  315 Compiled at Nov  4 2009, 15:18:00

Software Version : VRP (R) Software, Version 5.30 (S3328 V100R003C00SPC301)---UPE version




<UHKTSIT-KTS01>dis  int gi 0/0/1

GigabitEthernet0/0/1 current state : UP

Description : CONNECT TO EPEHWPPN01 G3/1/1 (MAIN), Switch Port

The Maximum Transmit Unit is 1500 bytes, The Maximum Frame Length is 13296

Internet protocol processing : disabled

IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 101b-54d8-eff8


Transmitter's pause : disable,  Receiver's pause : disable ;

Fiber transceiver information:

  VendorName : HG GENUINE

  bandwidth:   1G

  Compliance : 1000BASE-LX----SFP

  PartNumber : MXPD-243S

  Modes:       Single-Mode

  Fiber Type Supported and Max Transmission Distance:

  Length for 9um: 10 km---distance

  RxPower: -9.21 dBm(Normal)

  RxPower High Thresholds: -3.00 dBm

  RxPower Low Thresholds: -19.00 dBm

  TxPower: -5.43 dBm(Normal)

  TxPower High Thresholds: -3.42 dBm

  TxPower Low Thresholds: -7.42 dBm

  Bias current: 17896 uA(Normal)

  Bias High Thresholds: 40114 uA

  Bias Low Thresholds: 3209 uA           

  Voltage: 3.25 V(Normal)

  Voltage High Thresholds: 3.63 V

  Voltage Low Thresholds: 2.97 V

  Temperature: 45.00 C(Normal)

  Temperature High Thresholds: 75.00 C

  Temperature Low Thresholds: -5.00 C

This article contains more resources

You need to log in to download or view. No account?Register

  • x
  • convention:

Created Jan 21, 2013 12:04:50 Helpful(0) Helpful(0)

from V1R5 there is another command to display physical parameters:

<Quidway>display transceiver interface gigabitethernet 0/0/1
GigabitEthernet0/0/1 transceiver information:                                  
Common information:                                                            
  Transceiver Type               :1000_BASE_SX_SFP                             
  Connector Type                 :LC                                           
  Wavelength(nm)                 :850                                          
  Transfer Distance(m)           :0(9um),300(50um),150(62.5um)                 
  Digital Diagnostic Monitoring  :YES                                          
  Vendor Name                    :SumitomoElectric                             
  Ordering Name                  :                                             
Manufacture information:                                                       
  Manu. Serial Number            :79K056C05802                                 
  Manufacturing Date             :2007-09-14                                   
  Vendor Name                    :SumitomoElectric 


  • x
  • convention:

Created Jan 22, 2013 05:06:08 Helpful(0) Helpful(0)

Dear b00745015,

Thank you the info.. :-)

  • x
  • convention:


You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits