Why Does Telnet Login to a Switch Fail?

Latest reply: May 24, 2017 07:10:35 1090 1 0 0
Why Does Telnet Login to a Switch Fail?
  • x
  • convention:

ms.america
Created May 24, 2017 07:10:35 Helpful(0) Helpful(0)

The possible causes are:

  • No reachable route is available between the PC and switch, so a TCP connection cannot be set up. Use the ping command to check whether the switch is reachable from the PC.
  • The number of users that have logged in to the switch reaches the maximum. By default, a switch allows a maximum of five VTY users at a time. When the number of online VTY users reaches the maximum value, other users cannot log in to the switch through Telnet. In this case, you can log in to the switch from the serial port and run the display users command to check whether all the VTY channels are in use. If all VTY channels are in use, run the user-interface maximum-vty command to increase the maximum number of VTY users allowed on the switch. This maximum number can be set to 15 at most. You can also run the free user-interface vty command to disconnect some online users so as to release VTY channels.
  • An ACL is bound in the VTY user interface view. In this case, add a rule in the ACL to allow the IP address of this client.
  • Telnet is not configured as an allowed protocol in the VTY user interface view. For example, if the protocol inbound ssh command has been executed in the VTY user interface view, users cannot log in to this VTY channel through Telnet.
  • x
  • convention:

Comment

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login