When an inverter is searched by the SmartLogger for the first time, it is in the loading state on SmartLogger by default. When the search is complete and the actual state of the inverter is detected, the state on the SmartLogger is updated accordingly.
The state retention duration depends on the search process, which lasts about 2 to 3 minutes. When an inverter is disconnected and then reconnected, its state changes to loading on SmartLogger. After the SmartLogger detects the actual state of the inverter, the state on
SmartLogger is updated accordingly. This process takes about 1 minute.
When an inverter is in the loading state and SmartLogger communicates with the northbound monitoring system using Modbus TCP, SmartLogger regards the inverter as a disconnected inverter and does not report the loading state to the monitoring system.
