Got it

Why Do Two GE Interfaces Work at 100 Mbit/s After Auto-negotiation?

Latest reply: Mar 8, 2016 22:04:37 1100 1 1 0 0
Why Do Two GE Interfaces Work at 100 Mbit/s After Auto-negotiation?
  • x
  • convention:

Created Mar 8, 2016 22:04:37

When the link between the two interfaces is unstable during auto-negotiation, negotiation packets are lost. The two interfaces negotiate a speed in descending order of speeds (1000M->100M->10M). If they work at 100 Mbit/s after the negotiation, the reason is that the link between them is unstable. For example, the network cable is shaking, the RJ45 connector on an end is not properly connected, or the network cable is faulty. To make the two interfaces work at a specified speed, run the auto speed command on the interfaces.

View more
  • x
  • convention:


You need to log in to comment to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits


Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Please bind your phone number to obtain invitation bonus.