Why Do Interfaces on an ES510X4S Subcard Fail to Go Up When the Subcard Is Installed on an S5700 Switch?

Created: May 24, 2017 06:57:03Latest reply: May 24, 2017 07:05:24 1005 1 0 0

display all floors ^#1

x
convention：

Helpful (0) Favorite(0) Report

ms.america Created May 24, 2017 07:05:24

An ES510X4S subcard can be installed in the front card slot of the following S5700 models: S5700-28C-SI, S5700-52C-SI, S5700-28C-EI, S5700-52C-EI, S5700-28C-PWR-EI, S5700-52C-PWR-EI and S5700-28C-EI-24S.

An ES510X4S subcard can be used on a switch only when the switch and its rear subcard ETPB run the PCB versions listed in Table 1. If the PCB version of the switch or ETPB is not listed in the table, interfaces on the subcard cannot go Up.

**Table 1** PCB version mapping
Device or Subcard	PCB Version
S5700-28C-SI S5700-52C-SI S5700-28C-PWR-EI S5700-52C-PWR-EI S5700-28C-EI S5700-28C-EI-24S	VB
S5700-52C-EI	VC
ETPB	VC

x
convention：

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:

Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy

Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."

Enterprise

Consumer

Corporate

Carriers

Why Do Interfaces on an ES510X4S Subcard Fail to Go Up When the Subcard Is Installed on an S5700 Switch?

Third Party’s Trade Secret