Why Communication with the Destination Network Fails After a Route to the Destination Network Is Configured on a Device?

Latest reply: Sep 30, 2018 21:46:22 719 5 10 0

As shown in Figure 1, TerminalA cannot communicate with ServerB after a route to the network segment 10.2.2.0/24 of ServerB is configured on SwitchA.

Figure 1 Layer 3 communication diagram 
fig_dc_s_faq_09265801.png

Communication between TerminalA and ServerB is bidirectional. SwitchA must have a route to 10.2.2.0/24, and SwitchB must have a route to 10.1.1.0/24. After a route to the network segment 10.2.2.0/24 of ServerB is configured on SwitchA, you also need to configure a route to the network segment 10.1.1.0/24 of TerminalA on SwitchB. TerminalA and ServerB can communicate with each other only when they have routes to each other.

  • x
  • convention:

Created Sep 17, 2018 09:53:51 Helpful(1) Helpful(1)

:)thanks for you sharing !
  • x
  • convention:

Created Sep 19, 2018 15:38:20 Helpful(1) Helpful(1)

Hello Dear,

I just want to know whether it was question or an answer ? Why Communication with the Destination Network Fails After a Route to the Destination Network Is Configured on a Device?-2755215-1
  • x
  • convention:

Created Sep 29, 2018 14:05:50 Helpful(1) Helpful(1)

I have encountered this question about you. I have checked a lot of information, but I still have not answered this question clearly. Thank you for sharing this knowledge and solving my doubts. I hope that you can continue to update such knowledge points. Thank you. !Why Communication with the Destination Network Fails After a Route to the Destination Network Is Configured on a Device?-2765143-1Why Communication with the Destination Network Fails After a Route to the Destination Network Is Configured on a Device?-2765143-2
  • x
  • convention:

Created Sep 29, 2018 14:42:06 Helpful(1) Helpful(1)

I am very interested for this post, Thanks for you sharing . I have a suggest ,The intermediate Layer 2 device must release the service VLAN. It is recommended that the device configuration be checked first when it is deployed.
  • x
  • convention:

Created Sep 30, 2018 21:46:22 Helpful(0) Helpful(0)

Communication with the Destination Network Fails After a Route to the Destination Network Is Configured on a Device. It can be described as a word and a classic sentence, which is a model that my generation should learn. I am very interested for this post, which is very helpful to our daily troubleshooting. This post was last edited by yangyong at 2018-10-31 16:08.
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Login
Fast reply Scroll to top