Which of the following alarms and commands are generated on the router model?

Hi, Team:

        Which of the following alarms and commands are generated on the router model?

1. display alarm, there is alarm as below:

1 Critical 2020-11-10 16:01+08:00 I2C4 Sensor address41 channel6 of slot */*, voltage major low[OID:1.3.6.1.4. 1.2011.5.25.129.2.2.11,BasCode:73217]

2. display voltage, ther is feedback as below:

Base-Board, Unit:V, Slot 1

--------------------------------------------------------------------------------

PCB       I2C Addr Chl Status   Require MajorL FatalL MajorH FatalH Vlt(V) Ratio

--------------------------------------------------------------------------------

E8GFB     4   41   0   NORMAL   1.20    1.12   1.03   1.28   1.37   1.22   1.00

E8GFB     4   41   1   NORMAL   1.50    1.40   1.29   1.61   1.71   1.49   1.00

E8GFB     4   41   2   NORMAL   1.80    1.67   1.55   1.93   2.05   1.79   1.00

E8GFB     4   41   3   NORMAL   2.50    2.32   2.14   2.68   2.85   2.48   0.76

E8GFB     4   41   4   NORMAL   3.00    2.79   2.58   3.20   3.41   2.93   0.58

E8GFB     4   41   5   NORMAL   3.30    3.06   2.84   3.53   3.75   3.25   0.58

E8GFB     4   41   6   MAJOR    12.00   10.00  9.00   13.81  14.37  10.00  0.16

Best regrad!