Which Commands Determine the User Level

Ravger · Created Mar 19, 2016 06:04:00

If the authentication mode of the user is non-authentication, the user level is specified by the user privilege command in VTY mode.

If the authentication mode of the user is local authentication, the user level can be set in the following ways that are in descending order of priorities:

Use the user privilege command in VTY mode to set the user level.
If the authentication mode of the user is remote authentication, the user level can be set in the following ways that are in descending order of priorities:

Send the user level from the authentication server to the switch after the authentication passes.
Use the user privilege command in VTY mode to set the user level.
If remote authentication and local authentication are configured on a user, remote authentication is first configured. Then local authentication is configured. The administrator level can be set in the following ways that are in descending order of priorities:

Send the user level from the authentication server to the switch after the authentication passes.
Use the user privilege command in VTY mode to set the user level.

GladysP · Created Apr 27, 2020 14:28:34

thanks for this presentation.

GladysP · Created Apr 27, 2020 14:28:41

thanks a lot

Which Commands Determine the User Level

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

Which Commands Determine the User Level

Third Party’s Trade Secret

My Followers