When a CE6850HI, CE6850U-HI, CE6851HI, CE6860EI, CE7850EI, CE8850EI, or CE8860EI switch functions as a VXLAN Layer 3 gateway, configure a service loopback interface on the switch to loop back service packets of the VXLAN Layer 3 gateway.
Perform the following configurations:
<HUAWEI> system-view
[~HUAWEI] interface eth-trunk 1
[*HUAWEI-Eth-Trunk1] service type tunnel //Enable the service loopback function in the Eth-Trunk interface view.
[*HUAWEI-Eth-Trunk1] trunkport 10ge 1/0/1 //Add an idle member interface to the Eth-Trunk.
[*HUAWEI-Eth-Trunk1] commit
You can also find the answer in VXLAN Configuration Guide. This post was last edited by sfa at 2018-06-28 13:43.
Which CE Series Switches Need to Be Configured with the service type tunnel Command When They Function as VXLAN Layer 3 Gateways?
Created: May 15, 2018 09:36:08
486
0
0
0
- x
- convention：
Reply
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
