Which Cables Can Be Used for Stack Connections

Created: Jul 31, 2019 08:25:24Latest reply: Jul 31, 2019 08:25:52 56 1 1 0
  Rewarded Hi-coins: 0 (problem resolved)

Which Cables Can Be Used for Stack Connections?

  • x
  • convention:

Featured Answers
DCN_Documentation
Official Created Jul 31, 2019 08:25:52 Helpful(1) Helpful(1)

Stack setup just requires ordinary service cables instead of dedicated stack cables. Optical ports can be connected using high-speed cables, AOC cables, or optical modules+fibers. Electrical ports can be connected using Category 6, Category 6A, or Category 7 cables.

When setting up a stack, ensure that optical modules and cables on ports used for stack connections are properly installed and these ports are Up.

NOTE:

•10GE optical ports can be used for stack connections only when they have 10GE optical modules installed. They cannot be used for stack connections when having GE optical modules or GE copper modules installed.


•SIP ports on the CE12800 and CE12800E can use network cables or LC fibers. When LC fibers are used, the SIP ports must have GE optical modules installed.


•For CE8800, CE7800, CE6800, and CE5800, in V100R006C00, 40GE optical modules of the QSFP-40G-SR-BD model cannot be used to set up a stack. This limitation does not apply to V200R001C00 and later versions.

  • x
  • convention:

All Answers
DCN_Documentation
DCN_Documentation Official Created Jul 31, 2019 08:25:52 Helpful(1) Helpful(1)

Stack setup just requires ordinary service cables instead of dedicated stack cables. Optical ports can be connected using high-speed cables, AOC cables, or optical modules+fibers. Electrical ports can be connected using Category 6, Category 6A, or Category 7 cables.

When setting up a stack, ensure that optical modules and cables on ports used for stack connections are properly installed and these ports are Up.

NOTE:

•10GE optical ports can be used for stack connections only when they have 10GE optical modules installed. They cannot be used for stack connections when having GE optical modules or GE copper modules installed.


•SIP ports on the CE12800 and CE12800E can use network cables or LC fibers. When LC fibers are used, the SIP ports must have GE optical modules installed.


•For CE8800, CE7800, CE6800, and CE5800, in V100R006C00, 40GE optical modules of the QSFP-40G-SR-BD model cannot be used to set up a stack. This limitation does not apply to V200R001C00 and later versions.

  • x
  • convention:

Comment

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login