Where Can I Get the Basic Manual of MA5680T

Hello Ussr. we are reviewing your question we will answer you shortly. Thanks & Regards.

Hello,
The manual for downloading the MA5680T
SmartAX
MA5600T/MA5603T/MA5608T Product Documentation

https://support.huawei.com/hedex/hdx.do?lib=EDOC100017162531180AKK&docid=EDOC1000171625&lang=en

To obtain permissions, perform the following steps:

Customers: Register a product or contract, and obtain permission to access or download the product.

Partners: Associate at your company, and obtain approval by the administrator of your company. Permissions are granted depending on the certification level of your company.

Happy to help you!

Thanks

ok, while I'm not approved, see if you can help me, I went to add the first plate and the following thing happened:
-------------------------------------------------- -----------------------
 SlotID BoardName Status SubType0 SubType1 Online / Offline
 -------------------------------------------------- -----------------------
 0
 1 H805GPFD Config
 2
 3
 4
 5
 6
 7 H802SCUN Standby_normal
 8 H802SCUN Active_normal
 9
 10
 11
 12
 13
 14
 15
 16
 17 H801X2CS Normal
 18 H801X2CS Normal
 19
 20
 -------------------------------------------------- -----------------------

she was in this status of config, what to do?

soon after it changes to the following status:

1 H805GPFD Failed Online

Hello, friend!

Ensure that the IO board package file contains the H805GPFD board software. 

If the fault persists, the fault may be caused by incorrect configurations. You need to locate the faulty configuration based on the information. 

The board is reset or fails to be normal. 

1.Basic Information 

huawei(config)#display time

huawei(config)#display sysuptime

huawei(config)#display board 0

huawei(config)#display version

huawei(config)#display version backplane 0

huawei(config)#display version 0/<Mainboard slot-id>

huawei(config)#display version 0/<Standby board slot-id>

huawei(config)#display patch all

huawei(config)#display io-packetfile information

huawei(config)#display log all

huawei(config)#display event history all list

huawei(config)#display alarm history all list

huawei(config)#display current-configuration

huawei(diagnose)%%display elabel 0

huawei(diagnose)%%display reset-record

huawei(diagnose)%%display reboot-record active

huawei(diagnose)%%display reboot-record standby

huawei(diagnose)%%display error active

huawei(diagnose)%%display error standby

huawei(diagnose)%ugging bsp info

huawei(diagnose)%%display lastwords history

huawei(su)%%display flash state active

huawei(su)%%display flash state standby

huawei(su)%%display upgrade-log active

huawei(su)%%display upgrade-log standby

huawei(su)%%display efs active

huawei(su)%%display efs standby

2. Information about the transparent channel 

huawei(su)%%transparent on 0/<slot-id>

Wait five minutes... 

huawei(su)%%transparent off

3. Automatic loading debugging information 

huawei(su)%in enable

huawei(su)%in print 0x90 1  

huawei(su)%in send 0x90 5 2

huawei(su)%in send 0x90 1 0xff

Wait 10 minutes... 

huawei(su)%in print 0x90  0

huawei(su)%in disable

4. Query the records of configuration restoration failures. 

huawei(su)%in enable

huawei(su)%% dbwin print 0xd7 1

huawei(su)%% dbwin print 0x11f 1

huawei(su)%% dbwin send 0xd7 7 1 10

huawei(su)%% dbwin send 0x11f 4

huawei(su)%% dbwin print 0xd7 0

huawei(su)%% dbwin print 0x11f 0

huawei(su)%in disable

Thanks!

I'm really new to this, I found the following information, can you help me?

06-15 20:20:29-03:00 Frame 0 Slot 1 Line:4666
Reset reason:The configuration fails.
Stack info: 0x03615a08 0x03621290

MA5680T#display io-packetfile information
Version of the board software packetfile:MA5600V800R015C00
Board software saved in mainboard:
---------------------------------------------------------------------------
Index File Type Version File Length
---------------------------------------------------------------------------
0 H801X2CA CPLD 107 11008
1 H801X1CA CPLD 107 10880
2 H801GICG BASE BIOS 114 4864
3 H801GICF BASE BIOS 114 4736
4 H801GICE BASE BIOS 114 4608
5 H801GICD BASE BIOS 114 4480
6 H801FICB BASE BIOS 114 4352
7 H801GICG PROGRAM 368 48512
8 H801GICF PROGRAM 368 48384
9 H801GICE PROGRAM 368 48256
10 H801GICD PROGRAM 368 48128
11 H801FICB PROGRAM 368 48000
12 H801X2CA BASE BIOS 114 4480
13 H801X1CA BASE BIOS 114 4352
14 H801X2CA PROGRAM 368 48256
15 H801X1CA PROGRAM 368 48128
16 H801GICF CPLD 110 5504
17 H801GICD CPLD 110 5376
18 H801GICG CPLD 107 10752
19 H801GICE CPLD 107 10624
20 H801X2CS BASE BIOS 105 7296
21 H801X2CS CPLD 105 55424
22 H801X2CS PROGRAM 149 57088
23 H801GICK PROGRAM 318 1702912
24 H801GICK BASE BIOS 113 226816
25 H802GPFD BASE BIOS 116 1048704
26 H802GPFD PROGRAM 715 11587072
27 H803GPFD BASE BIOS 116 1048704
28 H803GPFD PROGRAM 715 7843328
29 H801GPMD PROGRAM 715 7195008
30 H806GPBH PROGRAM 715 7194880
31 H806GPBH BASE BIOS 110 1048704
32 H806GPBD PROGRAM 715 7194880
33 H806GPBD BASE BIOS 110 1048704
34 H807GPBD PROGRAM 015 6507520
35 H807GPBH PROGRAM 015 6507392
36 H805GPFD PROGRAM 015 6507264
37 H803EPFD PROGRAM 015 6507136
38 H802XEBD PROGRAM 015 6507008
39 H801XGBD PROGRAM 015 6506880
40 H807GPBD BASE BIOS 108 652288
41 H802XEBD BASE BIOS 108 652160
42 H801XGBD BASE BIOS 108 652032
43 H807GPBH BASE BIOS 108 651904
44 H803EPFD BASE BIOS 108 651776
45 H805GPFD BASE BIOS 108 651648
---------------------------------------------------------------------------
Status of the board software packetfile:active

I don't know how to get into this (su)

What is displayed after the display patch all command is executed?

This

MA5680T#display patch all
Software Version:MA5600V800R017C00
SPC101
HP1009
------------------------------------------------------------------------
Current Patch State:
------------------------------------------------------------------------
Patch Name Patch State Delivery Attribute Dependency
------------------------------------------------------------------------
SPC101 running common cold patch NO
HP1009 running common hot patch YES
------------------------------------------------------------------------
Total:2
Patches in the system cannot be rolled back

The version of the IO board package file does not match the version of the NE software. The version of the NE software is V800R017, and the version of the IO board package file is V800R015. 

Reload a software package to ensure that the NE software version matches the IO package version.

You need to contact the device provider to obtain the software package. We do not have permission to download the software package. 

Thanks!

ok, so i have to wait for someone to approve my permissions?