Hi team!
Here's a case that When the storage system is started, the PCIe links between the node and other nodes fail.
Possible Causes
Cause 1:
The PCIe cable of the controller is incorrectly connected.
Cause 2:
The internal communication links fail to work due to an internal fault in the system.
Recommended Actions
Cause 1:
Check whether a PCIe cable is incorrectly connected according to the installation guide or network assistant specific to your product model.
If a PCIe cable is incorrectly connected, re-connect it properly and restart the system.
Cause 2:
Collect system logs and contact R&D engineers for help.
Check After Recovery
After restarting all nodes, check whether the same error code appears.
If no, the fault is rectified and no action is required. If yes, contact R&D engineers.
