Hi, when OLT failover, why some PON becomes active very fast, but some slot/PON ports need to take 10 seconds (PON port LED becomes green) ? PLease advise, thanks in advance.
Normally what is the long time for OLT PON slot/PON ports becomes active? ---It depends on how many configurations there are on the OLT,the more configurations the more time it will take to become normal.
I am very sorry, I thought it was to restart the OLT in the morning. If it is a switchover, it needs to be analyzed according to the specific networking and protection group configuration (same board tybeb, cross-board typeb, typec or dual-return protection group, etc.), 10s is partialLong
ok, there are 4 slot, the first slot PON ports very fast became active (LED becomes green), but the slot 2 take more than 10 seconds to become active. Is this normal? Thanks in advance.
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."