What Measures Should Be Taken When an AP Fails to Obtain an IP Address Using DHCP?

rayma2010 · Created May 10, 2017 08:13:36

Hello,

Perform the following steps to locate the fault:
1. Check whether the AP is configured to obtain an IP address using DHCP.
2. Check whether the Layer 2 link between the AP and DHCP server is working properly.
3. Run the display ip pool name ip-pool-name used command on the DHCP server to
check whether the AP has obtained an IP address.

Hope to help you!

Caroline_Herrera · Created Jan 21, 2022 07:05:45

A good explanation rayma2010!

What Measures Should Be Taken When an AP Fails to Obtain an IP Address Using DHCP?

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

What Measures Should Be Taken When an AP Fails to Obtain an IP Address Using DHCP?

Third Party’s Trade Secret

My Followers