Basic rate is
- E1=2 Mbps (32TS *8 bit/sample * 8 K sample/sec)
- E2=4E1s=8 Mbps
- E3=4E2s=34 Mbps
- E4=4E3s=140 Mbps
Only E1, E3, and E4 are commercial rates.
For E2 it is 4 E1s not 8 E1s and it is total rate is 4*2M bps= 8 Mbps
We do not have such board which can support this E2 interface.
So to send this E2, the customer to provide inverse multiplexer to Mux/Demux his E2(8M) to 4 E1s then connect these 4 E1s to our equipment (at the Tx End)… and convert back the 4 E1s coming from our Equipment to E2 signal (at the Rx end ).
This post was last edited by Raluca29 at 2018-08-08 05:55.
