What is the program and packet file in Huawei MA5600 DSLAM?
- x
- convention：
- Emotion(0)
|
Hello,
load programThis command is used to load a board program. When you need to upgrade a board program, run this command. After the command is executed successfully, wait for the loading to finish. After the loading finishes, you need to reset the system to make the loaded program take effect.  NOTICE:
Formatload program { xmodem | tftp server-ipaddr | ftp server-ipaddr | sftp server-ipaddr } { frameid | frameid/slotid } For more details please refer to the link: load packetfileThis command is used to load the program packet files. When you need to upgrade or change the version of the system, run this command. Load the program packet files and then load the upgraded database of the new version. After you run the reboot command to reset the system, the host program, BIOS and CPLD in the packet file take effect. After the system starts and works in the normal state, the host program is upgraded to the newly-loaded version. Format |
|
Posted by mehdi_noori at 2019-10-13 09:44 Thanks for your help but unfortunately I don't have hedex so could you please send the PDF link of ... 
|
|
Comment
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
