What is the basic BTS Data Configuration for GSM-R?

Created: May 10, 2019 14:24:49Latest reply: Jul 22, 2019 20:12:10 264 3 0 0
  Rewarded Hi-coins: 0 (problem resolved)

This post enquires what is the basic BTS Data Configuration for GSM-R.


Can someone send me the basic BTS Data Configuration for GSM-R?


Thanks!

  • x
  • convention:

Featured Answers
eugenm
Created May 10, 2019 14:25:54 Helpful(0) Helpful(0)

Hello there!

To add a BTS, run the following command:

ADD BTS: BTSID=9, BTSNAME="BTS3900_TDM", BTSTYPE=BTS3900_GSM, BTSDESC="3900", SEPERATEMODE=SUPPORT, SERVICEMODE=TDM, SRANMODE=SUPPORT;

To add a BTS cabinet, run the following command:

ADD BTSCABINET: IDTYPE=BYID, BTSID=9, CN=0, SRANMODE=SUPPORT, TYPE=BTS3900;

To add a BTS board, run the following command:

ADD BTSBRD: IDTYPE=BYID, BTSID=9, CN=0, SRN=11, SN=0, BT=FMU;

To add an RXU chain, run the following command:

ADD BTSRXUCHAIN: IDTYPE=BYID, BTSID=9, RCN=0, TT=CHAIN, HCN=0, HSRN=0, HSN=6, HPN=0;

To add an RXU board to the BTS, run the following command:

ADD BTSRXUBRD: IDTYPE=BYID, BTSID=9, BT=DRFU, CN=0, SRN=4, SN=0, RXUNAME="bts3900gsm_1", RXUCHAINNO=0, RXUPOS=1;

To add a cell, run the following command:

ADD GCELL:CELLID=5,CELLNAME="cell-11", TYPE=GSM900, MCC="460", MNC="164", LAC=6, CI=1;

To add a frequency for the cell, run the following command:

ADD GCELLFREQ: IDTYPE=BYID,CELLID=5, FREQ1=975,FREQ2=977;

To add the signaling relationships for a cell, run the following command:

ADD GCELLOSPMAP: IDTYPE=BYID, CELLID=5, OPC=163;

To bind a cell to the BTS, run the following command:

ADD CELLBIND2BTS: IDTYPE=BYID,CELLID=5,BTSID=9;

To set basic GPRS attributes, run the following command:

SET GCELLGPRS: IDTYPE=BYID, CELLID=5, GPRS=SupportAsInnPcu;
ADD PTPBVC: NSEI=1, BVCI=2, IDTYPE=BYID, CELLID=5;

To add an TRX, run the following command:

ADD GTRX: IDTYPE=BYID,CELLID=5,TRXID=9, FREQ=975;
ADD GTRX: IDTYPE=BYID,CELLID=5,TRXID=10, FREQ=977;

To bind a logical TRX with the channel of an TRX board, run the following command:

ADD TRXBIND2PHYBRD: TRXID=9, TRXTP=DRFU, TRXPN=0, RXUIDTYPE=RXUNAME, RXUNAME="bts3900gsm_1";
ADD TRXBIND2PHYBRD: TRXID=10, TRXTP=DRFU, TRXPN=1, RXUIDTYPE=RXUNAME, RXUNAME="bts3900gsm_1";

To modify information about the TRX channel, run the following command:

SET GTRXCHAN: TRXID=9, CHNO=0,CHTYPE=MBCCH, TSPRIORITY=1;
SET GTRXCHAN: TRXID=9, CHNO=1, CHTYPE=SDCCH8, TSPRIORITY=2;

To add a connection from a BTS to a BSC, run the following command:

ADD BTSCONNECT: IDTYPE=BYID, BTSID=9, INPN=0, INCN=0, INSRN=0, INSN=6, DESTNODE=BSC, SRN=0, SN=18, PN=2;

To activate a BTS, run the following command:

ACT BTS:IDTYPE=BYID, BTSID=9;
  • x
  • convention:

Eugen Musat
All Answers
eugenm
eugenm Created May 10, 2019 14:25:54 Helpful(0) Helpful(0)

Hello there!

To add a BTS, run the following command:

ADD BTS: BTSID=9, BTSNAME="BTS3900_TDM", BTSTYPE=BTS3900_GSM, BTSDESC="3900", SEPERATEMODE=SUPPORT, SERVICEMODE=TDM, SRANMODE=SUPPORT;

To add a BTS cabinet, run the following command:

ADD BTSCABINET: IDTYPE=BYID, BTSID=9, CN=0, SRANMODE=SUPPORT, TYPE=BTS3900;

To add a BTS board, run the following command:

ADD BTSBRD: IDTYPE=BYID, BTSID=9, CN=0, SRN=11, SN=0, BT=FMU;

To add an RXU chain, run the following command:

ADD BTSRXUCHAIN: IDTYPE=BYID, BTSID=9, RCN=0, TT=CHAIN, HCN=0, HSRN=0, HSN=6, HPN=0;

To add an RXU board to the BTS, run the following command:

ADD BTSRXUBRD: IDTYPE=BYID, BTSID=9, BT=DRFU, CN=0, SRN=4, SN=0, RXUNAME="bts3900gsm_1", RXUCHAINNO=0, RXUPOS=1;

To add a cell, run the following command:

ADD GCELL:CELLID=5,CELLNAME="cell-11", TYPE=GSM900, MCC="460", MNC="164", LAC=6, CI=1;

To add a frequency for the cell, run the following command:

ADD GCELLFREQ: IDTYPE=BYID,CELLID=5, FREQ1=975,FREQ2=977;

To add the signaling relationships for a cell, run the following command:

ADD GCELLOSPMAP: IDTYPE=BYID, CELLID=5, OPC=163;

To bind a cell to the BTS, run the following command:

ADD CELLBIND2BTS: IDTYPE=BYID,CELLID=5,BTSID=9;

To set basic GPRS attributes, run the following command:

SET GCELLGPRS: IDTYPE=BYID, CELLID=5, GPRS=SupportAsInnPcu;
ADD PTPBVC: NSEI=1, BVCI=2, IDTYPE=BYID, CELLID=5;

To add an TRX, run the following command:

ADD GTRX: IDTYPE=BYID,CELLID=5,TRXID=9, FREQ=975;
ADD GTRX: IDTYPE=BYID,CELLID=5,TRXID=10, FREQ=977;

To bind a logical TRX with the channel of an TRX board, run the following command:

ADD TRXBIND2PHYBRD: TRXID=9, TRXTP=DRFU, TRXPN=0, RXUIDTYPE=RXUNAME, RXUNAME="bts3900gsm_1";
ADD TRXBIND2PHYBRD: TRXID=10, TRXTP=DRFU, TRXPN=1, RXUIDTYPE=RXUNAME, RXUNAME="bts3900gsm_1";

To modify information about the TRX channel, run the following command:

SET GTRXCHAN: TRXID=9, CHNO=0,CHTYPE=MBCCH, TSPRIORITY=1;
SET GTRXCHAN: TRXID=9, CHNO=1, CHTYPE=SDCCH8, TSPRIORITY=2;

To add a connection from a BTS to a BSC, run the following command:

ADD BTSCONNECT: IDTYPE=BYID, BTSID=9, INPN=0, INCN=0, INSRN=0, INSN=6, DESTNODE=BSC, SRN=0, SN=18, PN=2;

To activate a BTS, run the following command:

ACT BTS:IDTYPE=BYID, BTSID=9;
  • x
  • convention:

Eugen Musat
WalidAbdelFatahNawar
WalidAbdelFatahNawar MVE Created Jul 22, 2019 20:08:07 Helpful(0) Helpful(0)

Respected and appreciated
  • x
  • convention:

Mr.Jack
Mr.Jack Created Jul 22, 2019 20:12:10 Helpful(0) Helpful(0)

All parameters could modified based on your requirements
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login