What is the backplane capacity of RTN 950

Report · Created Feb 20, 2019 01:17:56

RTN 950 support 2.5G backplane capacity each slot at most. but configuration need to be done for 2.5G(defaulty 1Gbps). the backplane capacity is not only related to SCC board, but related to each kind of board.

1. Fot each board backplane capacity, please check in product document,for example EG4/EG4P(Description->IDU Hardware description->boards->EG4/EG4P->Functions and Feathers->Backplane bus bandwidth):
•1 Gbit/s when an EG4/EG4P board works with an SL91CSH board
•2.5 Gbit/s when an EG4/EG4P board works with an SL92CSH/CSHU/CSHUA board

2. If the board and SCC board support 2.5Gbps, you need to do configuration too
please read product document for detail: Reference->Network Management->Configuring the Backplane Bus Rate

Procedure:
1.In the NE Explorer, select the desired NE from the Object Tree and then choose Configuration > NE Properties from the Function Tree.
2.On the Advance Properties tab page, set the backplane bus rate in Backplane Bus Mode.

.

Jali · Created Feb 18, 2019 06:17:12

Backplane capacity is depending on the slots capacity of the RTN. Every slot got its own backplane which located at the back of the casing.

Arban · Created Feb 18, 2019 08:22:36

Backplane capacity for RTN 950 is fixed at 2.5 Gbps if we use CSHU/CSHUA as the system control, timing, and switching board. However this value is configurable (up to maximum value of 2.5Gbps) if we use SL92CSH boards as system control, timing, and switching boards.

V84083177 · Created Feb 18, 2019 17:53:15

This post was last edited by V84083177 at 2019-02-18 17:55.

The OptiX RTN 950 is large-capacity IP radio equipment. The OptiX RTN 950 has a built-in packet switching platform with the switching capacity of 10 Gbit/s.

The OptiX RTN 950 is a high-capacity device. The OptiX RTN 950 has a built-in packet switching platform with the switching capacity of 120Gbit/s (with CSHUF), 10 Gbit/s (with CST/CSH/CSHU/CSHUA).

Report · Created Feb 20, 2019 01:17:56

RTN 950 support 2.5G backplane capacity each slot at most. but configuration need to be done for 2.5G(defaulty 1Gbps). the backplane capacity is not only related to SCC board, but related to each kind of board.

1. Fot each board backplane capacity, please check in product document,for example EG4/EG4P(Description->IDU Hardware description->boards->EG4/EG4P->Functions and Feathers->Backplane bus bandwidth):
•1 Gbit/s when an EG4/EG4P board works with an SL91CSH board
•2.5 Gbit/s when an EG4/EG4P board works with an SL92CSH/CSHU/CSHUA board

2. If the board and SCC board support 2.5Gbps, you need to do configuration too
please read product document for detail: Reference->Network Management->Configuring the Backplane Bus Rate

Procedure:
1.In the NE Explorer, select the desired NE from the Object Tree and then choose Configuration > NE Properties from the Function Tree.
2.On the Advance Properties tab page, set the backplane bus rate in Backplane Bus Mode.

.

AbhayKumarThakur · Created Apr 19, 2020 13:57:16

As per manual, RTN950 supports 8 directions. But RTN950A supports 10 directions. How it is getting calculated as no of Slots are same(Total-6).
Is it related to Backplane capacity ?

What is the backplane capacity of RTN 950

Recommended answer

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

What is the backplane capacity of RTN 950

Recommended answer

Third Party’s Trade Secret

My Followers