What Do I Do If Mode Switching Fails

A7med · Created Jan 17, 2019 07:56:12

ProcedureIf eNodeB have no cell or is not in eRANSharing mode, switching is not supported is prompted, perform the following operations:
Check whether the cells are configured. If not, please add cells, for details see DBS3900 Product Documentation.
On the menu bar, choose Maintenance > NE Config In Batch.
In the NE navigation tree on the upper left of the page, select the target eNodeBs for mode switching.
In the MML command text box, enter the MOD ENODEBSHARINGMODE MML command with eNodeB sharing mode set to SHARED_FREQ.
Clickto run the command.
Re-execute a mode switching task, see Switching to the Urgent Mode or Switching to the Normal Mode.
If The eNodeB backup configuration never existed, please config it manualy and then reconnect the eNodeB or The eNodeB backup configuration incorrect, please config it manualy and then reconnect the eNodeB is prompted, perform the following operations:
On the menu bar, choose Maintenance > NE Config In Batch.
In the NE navigation tree on the upper left of the page, select the target eNodeBs for mode switching.
In the MML command text box, enter the MOD CELLOP MML command and set Operator uplink RB used and Operator downlink RB used to proper values based on actual conditions.

NOTE:
In the common scenario, Operator uplink RB used and Operator downlink RB used are set to 16% by default.

Clickto run the command.
Reconnect the eNodeB

What Do I Do If Mode Switching Fails

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

What Do I Do If Mode Switching Fails

Third Party’s Trade Secret

My Followers