Hello Dear
What commands should I use in order for the router to pass the acceptance test (PAT)?
here is the already configured router
I appreciate it if you list all the commands checking in order
Thanks!
system-view
#
sysname BIP-4#bld-2240-GR01
#
telnet server enable
#
snmp-agent local-engineid 800007DB03000000000000
snmp-agent
#
clock timezone China-Standard-Time minus 08:00:00
#
portal local-server load flash:/portalpage.zip
#
drop illegal-mac alarm
#
#
wlan ac-global carrier id other ac id 0
#
set cpu-usage threshold 80 restore 75
#
dhcp enable
#
bfd
#
acl number 2000
rule 5 permit source 192.168.1.0 0.0.0.255
#
#
interface Vlanif1
ip address 192.168.1.1 255.255.255.0
dhcp select interface
dhcp server excluded-ip-address 192.168.1.2 192.168.1.126
dhcp server excluded-ip-address 192.168.1.128
dhcp server excluded-ip-address 192.168.1.254
dhcp server dns-list 8.8.8.8 213.55.96.148 213.55.96.166
#
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin privilege level 15
local-user admin service-type telnet http
#
firewall zone Local
priority 15
#
interface GigabitEthernet0/0/0
ip address 10.140.229.2 255.255.255.252
nat outbound 2000
#
interface GigabitEthernet0/0/1
ip address 10.140.230.2 255.255.255.252
nat outbound 2000
#
interface NULL0
#
bfd 1 bind peer-ip 10.140.229.1 source-ip 10.140.229.2 auto
commit
#
bfd 2 bind peer-ip 10.140.230.1 source-ip 10.140.230.2 auto
commit
#
ip route-static 0.0.0.0 0.0.0.0 10.140.229.1 preference 10 track bfd-session 1
ip route-static 0.0.0.0 0.0.0.0 10.140.230.1 preference 100 track bfd-session 2
#
user-interface con 0
authentication-mode password
user-interface vty 0 4
authentication-mode aaa
protocol inbound all
user-interface vty 16 20
#
wlan ac
#
return
