What Are the Possible Causes When the Status of the ATM Interface Is Down?

295 0 0 0

The possible causes are:

  • The optical fiber is connected incorrectly.

    Check that the optical module matches the optical fiber. For example, the multi-mode optical module does not match the single-mode optical fiber.

    Check that the optical fiber is correctly connected to the ATM interface. There should be two optical fibers. One sends data and the other receives data. They must be connected correctly; otherwise, the ATM interface cannot be Up.

  • The clock mode of the interface is set incorrectly.

    When two routers are directly connected, check that the internal clock is enabled on one of ATM interfaces. By default, the router uses the line clock. When the routers are directly connected or connected by the WDM device, the internal clock should be enabled on one of the routers through the clock master command.

  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login