What Are Requirements for Configuring IGMP Parameters on Each Interface of the Devices on a Shared Network Segment?

user_2790689 · Created May 16, 2017 05:37:47

ding

Adamcolob · Created May 16, 2017 06:18:53

When you configure IGMP parameters on interfaces in the scenario where a user network segment is connected to multiple devices, note that:

You must ensure that IGMP parameters configured on the interfaces of the devices on a shared network segment are consistent.

IGMP parameters on interfaces are mutually affected and restricted. If IGMP parameters configured on the interfaces of the devices on a shared network segment are inconsistent, the IGMP member relationships are chaotic.

Checking method: Run the display igmp interface interface-type interface-number verbose command on all the devices on the shared network segment to check IGMP parameters. If the IGMP parameter configurations are inconsistent, modify the configurations. The following list IGMP parameters:

IGMP version
Robustness
Query interval
Other querier timeout
Maximum query response time
Last member query count
Last member query interval
Startup query interval
Startup query count

agnesdaum · Created May 14, 2020 02:23:09

Thanks for the information What Are Requirements for Configuring IGMP Parameters on Each Interface of the Devices on a Shared Network Segment?-3303454-1

What Are Requirements for Configuring IGMP Parameters on Each Interface of the Devices on a Shared Network Segment?-3303454-1

What Are Requirements for Configuring IGMP Parameters on Each Interface of the Devices on a Shared Network Segment?

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

What Are Requirements for Configuring IGMP Parameters on Each Interface of the Devices on a Shared Network Segment?

Third Party’s Trade Secret

My Followers