What Are Common Reasons Why an OSPF Neighbor Relationship Cannot Change to Full

Latest reply: Mar 3, 2016 22:17:15 1052 1 0 0

Common causes of this problems are:

  • The OSPF network is a non-broadcast multiple access (NBMA) network, and no neighbor is configured.
  • The interval at which the OSPF neighbor sends Hello packets is longer than the aging time of the neighbor relationship.
  • In a stub area or not-so-stubby area (NSSA) area, some devices are not configured as stub routers or NSSA routers.
  • The configuration of OSPF verification is incorrect.
  • The OSPF router IDs on two ends of the OSPF link are different.
  • The network types on two ends of the OSPF link are different.
  • The MTU values on two ends of the OSPF link are different.
  • OSPF is not enabled on the local or remote device.
  • The area numbers on two ends of the OSPF link are different.

  • x
  • convention:

Created Mar 3, 2016 22:17:15 Helpful(0) Helpful(0)

Thank you for sharing.

  • x
  • convention:


You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Fast reply Scroll to top