Web Interface on S5720EI (7z not there?)

Thank you all!

That's right, as with V200R007 there is no 7Z anymore.

For S5720EI, there's no need to load web file in device. (Press MODE for 6s, you can connect to WEB inteface)

For details, please refer to Product Documnet to find the way to login in WEB.

http://support.huawei.com/enterprise/productsupport?lang=en&pid=6691579&idAbsPath=7919710|9856733|7923144|6691579

Thank you very much, very appreciated!

There is just one issue: The S5720EI-50X does not have any MODE button.

The manual says: Devices without the MODE button do not support first login through the Web system. (Chapter 1.1)

I do not want to user web system for initial configuration. I already did initlial configuration via CLI.
But I want to enable it for my colleagues afterwards.

Does that mean it is not possible to install web system on these switches?

No additional load web, the device is enabled by default.

Hi Carlo

Have you checked if the switch is running the correct firmware after update by entering
display startup
?

I have just updated an s5700LI-10P from V200R003 to V200R007 and the webinterface works.

I deleted the old web.7z file in the process.

Have you also verified if the HTTP-Server is running on the switch?

Hi, I have same problem on S5700-52-P-PWR-LI-AC just upgraded.

I upgraded it from s5700-p-li-v200r003c00spc300 to s5700-p-li-v200r007c00spc500

after reboot the device it use last firmware. but no web access is availble. Current flash show the old web.7z file.

http Service is up & running.

Did I need to delete the web.7z file ?

thanks, 

Carlo