Got it

Huawei Enterprise Support Community

Community Forums Access Network

we need set these paramet...

we need set these parameters about SNMP v3 in the olt.

Created: Sep 15, 2018 06:49:13Latest reply: Sep 18, 2018 08:00:28 1405 2 0 0 0

View the author ^1#

1 virsion:v3

2 user group:v3group1

3 user:v3user1

4 authentication-mode:sha

5 auth password:XXX

6 privacy-mode: aes128

7 privacy password:XXX

8 trap-hostname: huawei

9 trap-host address： 10.10.1.10

10 trap-paramsname： ABC

x
convention：
Emotion(0)

Like (0) Dislike (0) Favorite(0) Report

 Previous: Internet breaking frequently

Next: How to Prevent User-Side Attack to the MA5606T

(0) (0)

^2#

faysalji

Author Created Sep 17, 2018 10:26:20

more details on it please

View more

x
convention：

(0) (0)

^3#

GongXiaochuan

Created Sep 18, 2018 08:00:28

you can check below for reference

Set the SNMP parameters.
1. Configure the SNMP user, group, and view.
  The user name is user1, the group name is group1, the user authentication mode is SHA, the authentication password is authkey123, the user encryption mode is aes128, the encryption password is prikey123, the read, write and notify view names are hardy, and the view includes the internet subtree.
```
huawei(config)#snmp-agent usm-user v3 user1 group1 
authentication-mode sha authkey123 privacy-mode aes128 prikey123
huawei(config)#snmp-agent group v3 group1 privacy read-view hardy write-view hardy notify-view hardy
huawei(config)#snmp-agent mib-view hardy include internet
```
2. Set the SNMP version.
  The SNMP version is SNMP V3.
  NOTE:
  The SNMP version must be the same as the SNMP version set on the U2000.
```
huawei(config)#snmp-agent sys-info version v3
```
Enable the function of sending traps.
On the MA5600T/MA5603T/MA5608T, enable the function of sending traps to the U2000.
```
huawei(config)#snmp-agent trap enable standard
```
Configure the IP address of the destination host for the traps.
The host name is huawei, the IP address of the host is 10.10.1.10/24 (IP address of the U2000), the trap parameter name is ABC, the SNMP version is V3, the parameter security name is user1 (when the SNMP V3 is used, the parameter security name is the USM user name), and the traps are authenticated and encrypted.
```
huawei(config)#snmp-agent target-host trap-hostname huawei 
address 10.10.1.10 trap-paramsname ABC
huawei(config)#snmp-agent target-host trap-paramsname 
ABC v3 securityname user1 privacy
```

This post was last edited by GongXiaochuan at 2018-09-18 08:11.

View more

x
convention：

Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:

Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy

Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.

Please bind your phone number to obtain invitation bonus.