We can not add board GIN401 of OSN9800 M24
Please help to share how to fix add board GIN401 of OSN9800 M24. our team found issue to add board and the show error "Power is not enough code 41773
- x
- convention：
- Emotion(0)
|
Hello！ 1. Select the current control button 2. Set the value to 63 in the text box. 3.Click Apply（Kindly advise you to change the left and right to 63A.）
I just simulated your scenario. If the current value is too low, this alarm is generated.
If the alarm persists, check whether the device version matches the board version. Good luck |
|
|
As the picture the power is normal ,but the side right of the picture why capacity to issue |
|
|
Hello！ 1. Select the current control button 2. Set the value to 63 in the text box. 3.Click Apply（Kindly advise you to change the left and right to 63A.）
I just simulated your scenario. If the current value is too low, this alarm is generated.
If the alarm persists, check whether the device version matches the board version. Good luck |
|
Comment
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
