WDS Mode on DG8045 Not Exist

Hello, Mody007.
It's nice to meet you in the community.

We did not find the WDS attribute you said. Are you talking about the WPS attribute (see the figure below)?

If you can’t change the settings according to the method I provided, please contact your carrier and request them to configure it for you remotely, because your product belongs to the carrier series products. And there are many functions that cannot be managed on the local WEB page.

Thank you!

Hello,

Huawei DG8045 has reached the end of service (EOS). Contact your device provider for the latest firmware.

To complete the configuration of WDS, perform the following steps in sequence:
Create a WMM profile, configure a radio profile, bind the WMM profile to the radio profile, add an AP, bind a radio to the radio profile, enable the bridge function, configure the bridge mode, configure a security profile and define WPA2+PSK+CCMP, configure a bridge profile and bind it to the radio, configure bridge whitelist (optional), configure parameters for the AP wired interface, configure STP (optional), configure parameters sent to the AP, and check the configuration.

Thanks .