Hello everyone!
This time, I will share with you the concept of 5G transmission.
The global 5G fronthaul market scale will be doubled by 2021 and the average number of 5G fronthaul ports is expected to grow by 28% per year. However, carriers are facing last-mile challenges that may affect the development of all services.
Huawei FO810 empowers the 5G fronthaul network with large bandwidth, full scenarios, high reliability, and high performance. It saves the access to optical fiber resources for carriers and is an optimal integrated bearer solution.
Key Capability 1: Zero-Footprint Installation in Any Environment Within 10 Minutes, Site Deployment Time Reduced by 60%, and Single-Site OPEX Reduced by 75%
Fully Outdoor, Zero-Footprint Installation:
IEC 60529 standard
IP 65: highest dustproof level and strong water resistance
Operating temperature: –40°C to +55°C
Blade type, with indoor and outdoor compatibility
Industry's first outdoor WDM device, with full-metal shell and integrated configuration, reducing the cost of renting equipment rooms
Natural heat dissipation, no noise, energy-saving, and environmental friendliness
Plug and play, flexible deployment on poles/walls or in open racks, easy installation within 10 minutes, reducing site deployment time by 60%
Ready for Use After Power-On:
Automatic link establishment, no need for planning, commissioning, or configuration, NMS-based remote management and fault demarcation, and single-site OPEX reduction by 75%
The CPRI/eCPRI convergence board automatically traces the BBU/DU interface rate.
The CPRI/eCPRI convergence board completes service configuration.
The FO810 automatically traces the interface rate of the CPRI/eCPRI convergence board.
The BBU/DU and RRU/AAU perform rate auto-negotiation to determine the CPRI/eCPRI link rate.
Simplified O&M:
Using diversified OTN overheads, the FO810 supports fault locating and visualized O&M management.
Key Capability 2: 12 Ports Are Aggregated, Reducing Consumed Optical Fibers by 90%
Support for All Scenarios:
The FO810 supports GE, 10GE, 25GE, SDH, OBSAI, and CPRI/eCPRI services.
The services of 12 client-side ports are aggregated to one line-side port, reducing the number of optical fibers by 90%.
Turbo WDM Transmits High Bandwidths over Low-Cost Components:
Using the oDSP chip and turbo WDM technology, the FO810 transmits 100G bandwidths over low-cost 10G components.
That's all. Thank you!
