VXLAN interface

Hello,

The10GE SFP+ Ethernet optical ports support GE optical module. Please see the link for a list of supported modules(in the table the 10th item):

https://support.huawei.com/hedex/hdx.do?docid=EDOC1000147777&id=EN-US_CONCEPT_0138782112&lang=en

And all restrictions on the configuration and operation of VXLAN are given in the following documentation. There are no restrictions on the use of two 10GE ports for the model:

https://support.huawei.com/hedex/hdx.do?docid=EDOC1000147777&id=EN-US_CONCEPT_0141119035&lang=en

I hope this helps.

Hi user:

CE8850-32CQ-EI
Ports:
10GE SFP+ Ethernet Optical Port

A 10GE SFP+ Ethernet optical port supports auto-sensing to 1 Gbit/s, and can receive and send services at a rate of 1000 Mbit/s or 10 Gbit/s. Table 2-282 describes the attributes of a 10GE SFP+ Ethernet optical port.https://support.huawei.com/enterprise/en/doc/EDOC1000019246/d2b4bf4e/ce8850-32cq-ei

A VXLAN tunnel is identified by a pair of VTEP IP addresses. During VXLAN tunnel establishment, the local and remote VTEPs attempt to obtain the IP addresses of each other. A VXLAN tunnel can be established if the IP addresses obtained are reachable at Layer 3. When BGP EVPN is used to dynamically establish a VXLAN tunnel, the local and remote VTEPs first establish a BGP EVPN peer relationship and then exchange BGP EVPN routes to transmit VNIs and VTEPs' IP addresses.

https://support.huawei.com/enterprise/en/doc/EDOC1000173015?section=j006