VPNV4 routes do not transfer to vpn-instance
Hi Gents,
We have VPNV4 routes getting from peer PE3 router on my two local routers PE1 & PE2. Below is the screenshot. Now VPNV4 routes transferred to PE1 VPN-instance but not in PE2 VPN-instance as both have same import RT value.
My question is why not transferring to PE2 vpn_instance VPN1_in as transferred to PE1 vpn-instance VPN1_in.....both have same import RT.
The below picture is PE2 10.2.33.0 Route is best & valid.
The below picture is PE2 10.2.41.0 Route is best & valid.
The below pictues is PE2 10.2.33.0 & 10.2.41.0 Routes not best & valid in vpn-instance VPN1_in.....but in above picture is best & valid but in vpn-instance VPN1_in not best & valid.
The below picture is PE1, we have received 10.2.33.0 & 10.2.41.0 Routes best & valid. in vpn-instance VPN1_in,,,,,
- x
- convention：
- Emotion(0)
|
|
|
|
Thanks all for reply...find below details of specific routes..... Below picture is PE1 best & vlaid for 10.2.33.0
Below picture is PE2 not best & vlaid for 10.2.33.0
Thanks in advance. |
ViktorG
Created Apr 20, 2020 07:50:09
(0)
(0)
Good day, @LSA! As you can see from the problem route detail- in the Relay Tunnel Out-Interface: NO TUNNEL IS Available. And also it is Not Valid, Active or Best. As always, the issue is somewhere on top Please, check: - Do you have IP route towards 172.16.1.11 – make ping 172.16.1.11 - If MPLS LSP is present 172.16.1.11 – tracert lsp - If MPLS is activated on Interfaces - If MPLS LDP peers are established - compare the ping and tracert LSP results with the devices that already wor |
|
|
|
Comment
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
