This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Enterprise
Community Group Switches
VPLS with QinQ on one sid...

VPLS with QinQ on one side of the network

Latest reply: Jan 16, 2018 15:13:14 1913 7 0 1
display all floors #1
Hi everybody.

I've the scenario below working with L2VC, where on one side I deliver the circuit tunneling inside a QinQ (removing SVLAN on PE1) and on the other side I have the circuit attached direct from my PE2 to the internal switch belonging to the client. Every traffic that the client pushes on one side (it doesn't matter if it is tagged or untagged) can be seen on the other side.


VPLS with QinQ on one side of the network-2415357-1




I have a situation where I need to extend a VPLS between some locations and in one of those locations I need to deliver the VPLS in a CPE inside de client with QinQ - like the scenario above. Is there anyway to do something like L2VC to the VPLS?

Thanks.

This article contains more resources

You need to log in to download or view. No account?Register

x
  • x
  • convention：

Helpful (0) Favorite(1) Share Report
Admin Created Aug 26, 2017 01:23:17 Helpful(0) Helpful(0)

@网络管理员Lemon @网络管理员木头 please help
  • x
  • convention：
Come on！
Created Aug 28, 2017 19:54:07 Helpful(0) Helpful(0)

Just adding some informations.

What I need is a way to remove the SVLAN from VPLS when extending it to a CPE inside de client, like I did with L2VC (topology above).

Does anyone have any idea how to achive that?
  • x
  • convention：
Created Sep 16, 2017 20:19:55 Helpful(0) Helpful(0)

Hi.

Is there anybody out there that could me help about this question? Any Huawei employee?

Thank you.
  • x
  • convention：
Created Dec 30, 2017 15:54:12 Helpful(0) Helpful(0)

Posted by gululu at 2017-08-26 01:23 @网络管理员Lemon @网络管理员木头 please help
I would appreciate your help. Thanks.
  • x
  • convention：
MVE Created Jan 16, 2018 15:07:12 Helpful(0) Helpful(0)

Have you tried to change the VPLS to VLAN mode? The RAW mode don't send the TAG information.
  • x
  • convention：
MVE Created Jan 16, 2018 15:10:18 Helpful(0) Helpful(0)

On the PE1 side you configure without raw parameter and on the PE2 side you configure with tag parameter
  • x
  • convention：
MVE Created Jan 16, 2018 15:13:14 Helpful(0) Helpful(0)

No, I'm sorry. On the PE1 side try to configure port link-type hybrid.
  • x
  • convention：
Back to list

Reply

Reply
Advanced
B Color Image Link Quote Code Smilies
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy Terms of Use
Huawei Enterprise Huawei Carrier Forum Training & Certification

Copyright © 2019 Huawei Technologies Co., Ltd. All rights reserved.

Fast reply Scroll to top