Got it

VMware ESXi 6.0 OS Installation Guide on HUAWEI Server

Latest reply: Sep 13, 2017 03:07:48 2179 1 0 0 0

Hi, dear


This article describes how to install VMWare ESXi 6.0 on the HUAWEI server.


We use the RH2288H V3 server as an example, but the steps are the same for other HUAWEI servers.


OK, let us get starting.


What we need to prepare


Download the ISO file

You should download the VMWare ESXi 6.0 ISO file from the official website first.

https://kb.vmware.com/s/global-search/@uri?source=myvmware#q=esxi&t=MoreContent&sort=relevancy&f:@commonversion=[6.0]


Download the Driver 

You can download the driver package from the HUAWEI support website.

https://support.huawei.com/enterprise/en/software/251214447-ESW2000202869


What we need to configure before installing

1. Configure the system time

Login to the BIOS, and set the system time

configure the system time


2. Set the Boot Type

On the Boot screen, set Boot Type to Legacy Boot Type, and select Boot Type Order.


set the boot type 2


3. Set the Hard Disk Drive

On the Hard Disk Drive screen, use F5 or F6 to set the priority of the device where the OS is to be installed to the highest.

Then please press F10 to save it.

set the hard disk

4. Configure the RAID array

Please configure the RAID card by the following document.

https://support.huawei.com/enterprise/en/doc/EDOC1000004186?idPath=7919749|9856522|9856792|9901881


l   If you use an LSI SAS3008 or LSI SAS2308 RAID controller card, press Ctrl+C.

l   If you use an LSI SAS2208 RAID controller card, press Ctrl+H.

l   If you use an LSI SAS3108 RAID controller card, press Ctrl+R.

l   If you use SoftRAID, press Ctrl+M.


Steps for installing VMWare ESXi 6.0

1. Log in to the remote console, and mount the ISO file

Please login to the BMC, and choose the Remote Console, then mount the ISO file.


mount the ISO

2. Choose the Boot type from Virtual DVD-ROM

Restart the server and press F11 to the boot manager.

On the Boot Manager screen displayed after the password is authenticated, select Virtual DVD-ROM VM 1.1.0 and press Enter.

virtual boot manager

3. Login to the initial installation screen

Select ESXi-6.0.0-2494585-standard Installer and press Enter.

Then press Continue to log into the initial installation screen.

esxi 6.0 installer

welcome 6.0


4. Install VMWare ESXi 6.0 as prompted.

You can complete all installation steps as prompted.


After the VMWare ESXi 6.0 install successfully, you can use the username and password to login.

login 6.0

For more details, you can see the attachment.


Hope this can help you!


This article contains more resources

You need to log in to download or view. No account? Register

x

The post is synchronized to: Huawei Server OS Installation Cases

  • x
  • convention:

gululu
Created Sep 13, 2017 03:07:48

thanks for your sharing
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.