VCTRUNK1 cannot bound the 5th VC4 low-order service

liqiang185 · Created May 14, 2020 13:20:24

Dear friends!

For the EGS2 board, its VCTRUNK bound method needs to pay attention to the following information：

Each VC channel can be bound only to one VCTRUNK.
VCTRUNK1 to VCTRUNK24 must be bound when a board is housed in a slot providing 1.25G bit/s bandwidth.
A VCTRUNK can be bound with the VC-12 path or VC-3 path at one time. A VCTRUNK should not be bound with VC-12 and VC-3 paths at the same time.
In the case of N2EGS2 boards, VCTRUNK 1-VCTRUNK 12 can be bound only with lower order paths in VC-4s numbered 1-4. VCTRUNK 13-VCTRUNK 24 can be bound only with lower order paths in VC-4s numbered 5-8. VCTRUNK 25-VCTRUNK 36 can be bound only with lower order paths in VC-4s numbered 9-12. VCTRUNK 37-VCTRUNK 48 can be bound only with lower order paths in VC-4s numbered 13-16.
In the case of N3EGS2 boards, there is no requirement regarding VCTRUNK binding. One VCTRUNK can be bound with up to 24 VC-3s.
In the case of N2EGS2 boards, a VCTRUNK can be bound with a maximum of 12 VC-3s or 63 VC-12s.
In the case of N3EGS2 boards, a VCTRUNK can be bound with a maximum of eight VC-4s, 24 VC-3s, or 63 VC-12s.
For N2EGS2 board, VC-4s numbered 4, 8, 12, and 16 support the binding of VC-3 and VC-12 paths. The other VC-4s support the binding of VC-3 paths only.
For N3EGS2 board, VC-4s numbered 4, 8, 12, and 16 support the binding of VC-4, VC-3 and VC-12 paths. The other VC-4s support the binding of VC-4 and VC-3 paths only.

Thanks！

liqiang185 · Created May 14, 2020 13:20:24

Dear friends!

For the EGS2 board, its VCTRUNK bound method needs to pay attention to the following information：

Each VC channel can be bound only to one VCTRUNK.
VCTRUNK1 to VCTRUNK24 must be bound when a board is housed in a slot providing 1.25G bit/s bandwidth.
A VCTRUNK can be bound with the VC-12 path or VC-3 path at one time. A VCTRUNK should not be bound with VC-12 and VC-3 paths at the same time.
In the case of N2EGS2 boards, VCTRUNK 1-VCTRUNK 12 can be bound only with lower order paths in VC-4s numbered 1-4. VCTRUNK 13-VCTRUNK 24 can be bound only with lower order paths in VC-4s numbered 5-8. VCTRUNK 25-VCTRUNK 36 can be bound only with lower order paths in VC-4s numbered 9-12. VCTRUNK 37-VCTRUNK 48 can be bound only with lower order paths in VC-4s numbered 13-16.
In the case of N3EGS2 boards, there is no requirement regarding VCTRUNK binding. One VCTRUNK can be bound with up to 24 VC-3s.
In the case of N2EGS2 boards, a VCTRUNK can be bound with a maximum of 12 VC-3s or 63 VC-12s.
In the case of N3EGS2 boards, a VCTRUNK can be bound with a maximum of eight VC-4s, 24 VC-3s, or 63 VC-12s.
For N2EGS2 board, VC-4s numbered 4, 8, 12, and 16 support the binding of VC-3 and VC-12 paths. The other VC-4s support the binding of VC-3 paths only.
For N3EGS2 board, VC-4s numbered 4, 8, 12, and 16 support the binding of VC-4, VC-3 and VC-12 paths. The other VC-4s support the binding of VC-4 and VC-3 paths only.

Thanks！