Got it
Enterprise
Community Forums Switches
vc is up but cant ping ce...

vc is up but cant ping ce on mpls martini

Created: May 2, 2019 13:58:12Latest reply: May 13, 2019 00:37:44 1171 24 0 0
  Rewarded HiCoins： 0 (problem resolved)
display all floors #1

I created a network in ensp with mpls cloud on ospf on layer 3 interfaces. Then I created a vc on vlan 101. My vc 100 is up and everything seems ok but unable to ping both CEs. Is configuring tunnel policy must for establishing a vc link ?. Here is status of my vc 100

disp mpls l2vc  100

 Total LDP VC : 1     1 up       0 down


 *client interface       : Vlanif100 is up

  Administrator PW       : no 

  session state          : up

  AC status              : up

  VC state               : up

  Label state            : 0

  Token state            : 0

  VC ID                  : 100

  VC type                : VLAN

  destination            : 1.1.1.1

  local VC label         : 16           remote VC label      : 16

  control word           : disable

  remote control word    : disable

  forwarding entry       : exist

  local group ID         : 0

  remote group ID        : 0

  local AC OAM State     : up

  local PSN OAM State    : up

  local forwarding state : forwarding

  local status code      : 0x0

  remote AC OAM state    : up

  remote PSN OAM state   : up

  remote forwarding state: forwarding

  remote status code     : 0x0

  ignore standby state   : no

  BFD for PW             : unavailable

  VCCV State             : up

  manual fault           : not set

  active state           : active

  OAM Protocol           : --

  OAM Status             : --

  OAM Fault Type         : --

  PW APS ID              : --

  PW APS Status          : --

  TTL Value              : 1

  link state             : up

  local VC MTU           : 1500         remote VC MTU        : 1500

  local VCCV             : alert ttl lsp-ping bfd 

  remote VCCV            : alert ttl lsp-ping bfd 

  tunnel policy name     : -- 

  PW template name       : --  

  primary or secondary   : primary

  load balance type      : flow

  Access-port            : false

  Switchover Flag        : false

  VC tunnel info         : 1 tunnels 

    NO.0  TNL type       : ldp            , TNL ID : 0x0000000001004c4b42

  create time            : 0 days, 0 hours, 3 minutes, 46 seconds  

  up time                : 0 days, 0 hours, 2 minutes, 57 seconds

  last change time       : 0 days, 0 hours, 2 minutes, 57 seconds

  VC last up time        : 2019/05/02 18:26:06

  VC total up time       : 0 days, 0 hours, 2 minutes, 57 seconds

  CKey                   : 1

  NKey                   : 16777281

  PW redundancy mode     : frr

  AdminPw interface      : --

  AdminPw link state     : --

  Forward state          : send active, receive active

  Diffserv Mode          : uniform

  Service Class          : --

  Color                  : --

  DomainId               : --

  Domain Name            : --  
I added a tunnel policy and vc goes down. Unable to troubleshoot. 

thanks

  • x
  • convention：

I have this problem too (0) Favorite(0) Share Report
Previous: Quidway S2700 Booting Problem
Next: [DCN] Q & A: What is Huawei's CloudFabric solution and which products are included in the solution?
Featured Answers

Recommended answer

(0) (0)
chenhui
Admin Created May 5, 2019 02:12:44 Helpful(0) Helpful(0)

Posted by hashbang at 2019-05-04 08:29Hi ChenTY for your response. I'm attaching screenshot. The switches are 12800. They all are connec ...
@hashbang hi!

Please notice there are some limitations on VLL.

1. VLL cannot be configured on VLANIF 1;

2. the VLANIF interface configured with VLL can only correspond to one member interface;

3. the number of members in a VLAN bound to a VLL tunnel cannot be increased.

Please check if your configuration meet these limitations.

For more information, please refer to this link: http://support.huawei.com/hedex/ ... 2520VLL&lang=en.
View more
  • x
  • convention：
All Answers
chenhui
chenhui Admin Created May 2, 2019 14:31:23 Helpful(0) Helpful(0)

@hashbang hi,
which devices are you used in ensp? AR router, router or S5700 switch? and could you please provide the configuration and topology,
View more
  • x
  • convention：
hashbang
hashbang Created May 4, 2019 08:29:43 Helpful(0) Helpful(0)

RE: vc is up but cant ping ce on mpls martini

Posted by chenhui at 2019-05-02 14:31 @hashbang hi, which devices are you used in ensp? AR router, router or S5700 switch? and could you p ...
Hi Chen
TY for your response. I'm attaching screenshot. The switches are 12800. They all are connected in layer3 mode and ospf.
View more

This article contains more resources

You need to log in to download or view. No account? Register

x
  • x
  • convention：
hashbang
hashbang Created May 4, 2019 08:31:47 Helpful(0) Helpful(0)

hi chen
ty for ur response. I'm attaching a screenshot. The switches are 12800. All are connected with undo portswitch in layer3 mode.
View more
  • x
  • convention：
hashbang
hashbang Created May 4, 2019 08:34:33 Helpful(0) Helpful(0)

Posted by hashbang at 2019-05-04 08:31 hi chenty for ur response. I'm attaching a screenshot. The switches are 12800. All are connected wit ...
http://i66.tinypic.com/zn8p7a.png
View more
  • x
  • convention：
chenhui
chenhui Admin Created May 5, 2019 01:59:12 Helpful(0) Helpful(0)

Posted by hashbang at 2019-05-04 08:29 Hi ChenTY for your response. I'm attaching screenshot. The switches are 12800. They all are connec ...
can the VC works correctly when the interfaces which connect to the CE device modified from the vlanif interface to the physical interface? can you try this?
View more
  • x
  • convention：
chenhui
chenhui Admin Created May 5, 2019 02:12:44 Helpful(0) Helpful(0)

Posted by hashbang at 2019-05-04 08:29Hi ChenTY for your response. I'm attaching screenshot. The switches are 12800. They all are connec ...
@hashbang hi!

Please notice there are some limitations on VLL.

1. VLL cannot be configured on VLANIF 1;

2. the VLANIF interface configured with VLL can only correspond to one member interface;

3. the number of members in a VLAN bound to a VLL tunnel cannot be increased.

Please check if your configuration meet these limitations.

For more information, please refer to this link: http://support.huawei.com/hedex/ ... 2520VLL&lang=en.
View more
  • x
  • convention：
hashbang
hashbang Created May 5, 2019 08:53:50 Helpful(0) Helpful(0)

Posted by chenhui at 2019-05-05 02:12 hashbang hi, please notice there are some limitations on VLL1. VLL cannot be configured on the VLA ...
ty,
yes everything seems ok as per limitations. As its a test so just one vlan passing from ce6 to ce7. Both CEs have one interface passing this vlan.
View more
  • x
  • convention：
hashbang
hashbang Created May 5, 2019 08:54:15 Helpful(0) Helpful(0)

Posted by chenhui at 2019-05-05 02:12 hashbang hi, please notice there are some limitations on VLL1. VLL cannot be configured on the VLA ...
ty,
yes everything seems ok as per limitations. As its a test so just one vlan passing from ce6 to ce7. Both CEs have one interface passing this vlan.
View more
  • x
  • convention：
hashbang
hashbang Created May 5, 2019 08:57:10 Helpful(0) Helpful(0)

Posted by chenhui at 2019-05-05 01:59 can the VC works correctly when the interfaces which connect to the CE device modified from the vl ...
I tried but 12800 in ensp doesnt support l2vc on physical interface.
View more
  • x
  • convention：
123
Back to list

Comment

Advanced
B Color Image Link Quote Code Smilies
You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."

My Followers

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy User Agreement Terms of Use Cookie Settings
Huawei Enterprise Huawei Carrier Forum Training & Certification

Copyright © 2020 Huawei Technologies Co., Ltd. All rights reserved.

APP

Huawei Enterprise Support Community
Huawei Enterprise Support Community
Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.