Users Fail to Add the USG6650 Using SNMP

Hey there!

The possible causes are as follows:
The SNMP management configuration is not configured on the USG6650's management interface.

Procedure
Enter the USG6650's management interface view and configure the service-manage snmp permit command on the management interface to enable SNMP on the interface.



Suggestion and Summary
When adding USG6600 series firewalls to eSight, check whether eSightcan successfully ping the firewalls, whether interzone policies are correctly configured, and whether the service-manage snmp permit command is configured on the firewall's management interface. 

Thank you!